Printable View
Yes it would. The blank screen + error noise generally means your modeldb file is borked. Although, if it gets to the medieval splash screen and then craps out, it means it's one of your data files like export_descr_unit.txt. Check the last two lines of your system.log.txt in your main medieval directory. If it says "unspecified error" then it's most likely in the modeldb file... If it's in one of the data files it will give you helpful information about which file and what line in the file.
I had the exactly the same problem earlier. I started unit mod after found this thread, but I have already messed around with the data. I tried all things, and at the end, I decided to re install the game and patch again, my model.db or EDU files had nothing wrong, just needed a fresh install, it worked fine.Quote:
Originally Posted by Sir Robin the Brave
may be similar problem in your case, if you find all your files are correct and still getting a blank screen and nothing else, might want give clean install a try.
In term of multi mod running at the same time,the mod switch works by adding:
[features]
mod = franch
[io]
file_first = True
at the end of your mod .cfg file, , put all modified files, unit cards, etc in the coresponding sub folder in your mod\data folder, then the run the mod with .bat file, all the modded files will be read from the mod folder.
the only problem is that model.db still has to be run in the base data folder.
My solution to run multiple mods in the same mother M2TW folder would be copy the model.db file a few times and rename them to Origional_model.db, Franch_model.db, Byz_model.db etc, then when you want to play franch mod, just change that file to the active modle.db file.
I have tried at least 20 times to create my own unit with my own skin, or existing skins, but have been unsuccessful to various degrees (sometimes the game plays but the units are invisible, sometimes the game crashes on starting, sometimes the game goes to black screen and I have to restart it)
Finally, I copeied your sample unit EXACTLY, both the EDU and modelDB parts, and created a new byzantine skin. I don't even want this unit in my game, but I figured I would just try to get one unit working.
Still nothing, crashes to desktop and the log says "Could not find soldier battle model for unit type 'GR_Dragoons'."
If it gives you that error message then it's not reading your battle_models.modeldb file at all. What location is your model db file in, and what flags are you using to run the game?
it sounds like the model.db is not correct.
Try to add the new model text part in the middle of the model.db file (usually after the one you copied), once I tried to add to the end of the text, it didn't work. there should be a single space before and after the added text. if this doesn't work then I suggest try another clean uninstall and re install with patch, unpack, then mod the files.
it took me a while to get use to it, but now I have around 5-6 modded units and works fine.
good luck.
It's not a problem in the modeldb file. If it was, the game would crash and the only message would be "unspecified error". If it gets far enough to start parsing the files in the data directory, the modeldb file checked out. If it then crashes out saying it can't find the model for a given unit type, and there is an entry for that unit type in your modeldb file, then the game isn't trying to load your modeldb file, which means it's either in the wrong location (Like your mod folder) or you're not using --io.file_first
It's in the main data folder and it has:
[io]
file_first = true
In the preferences file. Plus I know it's working because it's loading my custom skins just fine.
See if you can tell me what I have got wrong here, trying to create basically a dismounted Gothic knight for scotland.
HTML Code:14 armored_nobles 1 4 73 unit_models/_Units/LN_Gothic_RN_Plate/dismounted_gothic_knights_lod0.mesh 121 73 unit_models/_Units/LN_Gothic_RN_Plate/dismounted_gothic_knights_lod1.mesh 900 73 unit_models/_Units/LN_Gothic_RN_Plate/dismounted_gothic_knights_lod2.mesh 2500 73 unit_models/_Units/LN_Gothic_RN_Plate/dismounted_gothic_knights_lod3.mesh 6400 1 8 scotland 82 unit_models/_Units/LN_Gothic_RN_Plate/textures/LN_gothic_RN_plate_scotland.texture 80 unit_models/_Units/LN_Gothic_RN_Plate/textures/LN_gothic_RN_plate_normal.texture 53 unit_sprites/hre_Dismounted_Gothic_Knights_sprite.spr 1 8 scotland 61 unit_models/AttachmentSets/Final Heater_scotland_diff.texture 61 unit_models/AttachmentSets/Final Heater_scotland_norm.texture 0 1 4 None 21 MTW2_Slow_2HSwordsman 0 1 24 MTW2_2HSwordsman_Primary 0 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002
HTML Code:type Armored Nobles
dictionary Armored_Nobles ; Zwei Hander
category infantry
class heavy
voice_type Heavy
banner faction main_infantry
banner holy crusade
soldier Armored_Nobles, 48, 0, 1.2
attributes sea_faring, hide_forest, hardy, can_withdraw
formation 1.2, 1.2, 2.4, 2.4, 3, square
stat_health 1, 0
stat_pri 14, 6, no, 0, 0, melee, melee_blade, slashing, sword, 25, 1.3
;stat_pri_ex 0, 0, 0
stat_pri_attr no
stat_sec 0, 0, no, 0, 0, no, melee_simple, blunt, none, 25, 1
;stat_sec_ex 0, 0, 0
stat_sec_attr no
stat_pri_armour 10, 4, 0, metal
;stat_armour_ex 7, 8, 0, 0, 4, 0, 0, metal
stat_sec_armour 0, 0, flesh
stat_heat 5
stat_ground 1, -2, 3, 2
stat_mental 9, normal, trained
stat_charge_dist 30
stat_fire_delay 0
stat_food 60, 300
stat_cost 1, 760, 150, 90, 70, 760, 4, 170
armour_ug_levels 4
armour_ug_models Armored_Nobles
ownership scotland
era 2 scotland
;unit_info 14, 0, 11
And you've created unit_models/AttachmentSets/Final Heater_scotland_diff.texture and unit_models/AttachmentSets/Final Heater_scotland_norm.texture?
They have to be in the data folder, not the mod/data folder.
they already existed, and yes they were in the data folder.
All the skins for this unit already existed.
What problem exactly do you get with this unit?
If it's a crash, what does the system log say?
This is a very tough and long process, I kinda gave up on it till a more simple alternative comes along. I simply choose the easy way out of adding units by mix-matching armour upgrades and mount available within the same faction.
You can always replace the upgrade models with those from feudal knights but the lances will be those wooden ones used by them. And for some other faction like English, you can even give the armoured horse to your English Knights and increase the defensive stats a bit to make them look more special.Quote:
type NE Royal Guards
dictionary NE_Late_Bodyguard ; NE Royal Guards
category cavalry
class heavy
voice_type Heavy
banner faction main_cavalry
banner holy crusade_cavalry
soldier NE_Bodyguard, 32, 0, 1
mount armoured horse
mount_effect elephant -4, camel -4
attributes sea_faring, hide_forest, very_hardy, can_withdraw, can_formed_charge, knight
formation 2, 4.4, 3, 6, 2, square, wedge
stat_health 1, 0
stat_pri 13, 8, no, 0, 0, melee, melee_blade, piercing, spear, 25, 1
;stat_pri_ex 0, 0, 0
stat_pri_attr no
stat_sec 14, 4, no, 0, 0, melee, melee_blade, piercing, sword, 25, 1
;stat_sec_ex 0, 0, 0
stat_sec_attr no
stat_pri_armour 9, 5, 3, metal
;stat_armour_ex 9, 10, 0, 0, 5, 3, 3, metal
stat_sec_armour 0, 0, flesh
stat_heat 6
stat_ground 0, -2, -4, 0
stat_mental 15, disciplined, highly_trained
stat_charge_dist 45
stat_fire_delay 0
stat_food 60, 300
stat_cost 1, 1070, 250, 120, 95, 1070, 1, 210
armour_ug_levels 5, 6
armour_ug_models NE_Late_Bodyguard, NE_Late_Bodyguard_ug1
ownership england, scotland, france, hre, denmark, poland, hungary
era 2 england, scotland, france, hre, denmark, poland, hungary
;unit_info 13, 0, 34
type Dismounted NE Royal Guards
dictionary Dismounted_NE_Bodyguard ; Dismounted NE Royal Guards
category infantry
class heavy
voice_type Heavy
banner faction main_infantry
banner holy crusade
soldier Dismounted_NE_Late_Bodyguard, 48, 0, 1.2
attributes sea_faring, hide_forest, very_hardy, can_withdraw
formation 1.2, 1.2, 2.4, 2.4, 3, square
stat_health 1, 0
stat_pri 16, 3, no, 0, 0, melee, melee_blade, piercing, sword, 25, 1
;stat_pri_ex 0, 0, 0
stat_pri_attr no
stat_sec 0, 0, no, 0, 0, no, melee_simple, blunt, none, 25, 1
;stat_sec_ex 0, 0, 0
stat_sec_attr no
stat_pri_armour 9, 9, 3, metal
;stat_armour_ex 9, 0, 0, 0, 9, 3, 3, metal
stat_sec_armour 0, 0, flesh
stat_heat 6
stat_ground 1, -2, 3, 2
stat_mental 15, disciplined, highly_trained
stat_charge_dist 30
stat_fire_delay 0
stat_food 60, 300
stat_cost 1, 570, 55, 80, 60, 570, 4, 140
armour_ug_levels 5, 6
armour_ug_models Dismounted_NE_Late_Bodyguard, Dismounted_NE_Late_Bodyguard
ownership england, scotland, france, hre, denmark, poland, hungary
;unit_info 16, 0, 42
I'am doing a similar thing, i want to make it so that scots guards are acuireable for both france and scotland. i dont get what ur saying up there could u simplify it a little more for me? also i cant open battle_models.modeldb... help please. thanks :DQuote:
Originally Posted by Musashi
By the by, a short notice on the modeldb file (just had my first look on it tbh):
I guess the pathnames in there are relative to the data directory, so if you use ../mymod/data/models_unit instead of models_unit in each path they probably work in a mod folder.
Edit: Just tested that, you can put the textures into mod folders. However the modeldb file will still be read from the base dir if you use file_first and is not recognised at all if you don't.
i have figured out how to edit it... derr, anyways i want to edit the scots_gaurdwhat of that do i want too copy? i thought i could just copy and past the scot gaurd info and just replace all the france with scotland.Quote:
Brigandine_milan.texture 77 unit_models/_Units/LN_Brigandine_heavy/textures/LN_ Brigandine_normal.texture 53 unit_sprites/milan_Genoese_Crossbowmen_ug1_sprite.spr 1 5 milan 67 unit_models/AttachmentSets/Final European CB Gun_milan_diff.texture 67 unit_models/AttachmentSets/Final European CB Gun_milan_norm.texture 0 1 4 None 20 MTW2_Pavise_Crossbow 14 MTW2_Swordsman 2 21 MTW2_Crossbow_Primary 14 fs_test_shield 2 18 MTW2_Sword_Primary 14 fs_test_shield 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002 11 scots_guard 1 3 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod0.mesh 121 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod1.mesh 1225 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod2.mesh 6400 1 6 france 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_france.texture 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_normal.texture 42 unit_sprites/france_Scots_Guard_sprite.spr 1 6 france 68 unit_models/AttachmentSets/Final European Archer_france_diff.texture 68 unit_models/AttachmentSets/Final European Archer_france_norm.texture 0 1 4 None 11 MTW2_Bowman 15 MTW2_Non_Shield 1 19 MTW2_Bowman_Primary 1 18 MTW2_Sword_Primary 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002 14 archer_militia 1 4 61 unit_models/_Units/EN_Peasant_Padded/archer_militia_lod0.mesh 121 61 unit_models/_Units/EN_Peasant_Padded/archer_militia_lod1.mesh 900 61
Still only gosts...:furious3:
Damn, damn, damn. Seems that my only problem is too create (or modify) a proper .bat file with the string --io.file_first.
Please can say me which .bat file I've to add this line to OR how have
I to create a new one ?
Have I to create, say, a file named "Age_of_War" with inside "medieval2.exe --io.file_first" ? Or one named "Medieval2" with "medieval2.exe --io.file_first"
BTW I'm using Medmanager. Should the right .bat file and Medmanager work together correctly ? I suspect this manager can play a role in my defets...
NM, lol, figured it out, i might have more questions l8er tho :PQuote:
Originally Posted by billiam_maillib
ok this is what i have edited,
toCode:type Scots Guard
dictionary Scots_Guard ; Scots Guard
category infantry
class missile
voice_type Heavy
banner faction main_missile
banner holy crusade
soldier Scots_Guard, 48, 0, 1.2
attributes sea_faring, hide_forest, very_hardy, can_withdraw
formation 1.2, 1.2, 2.4, 2.4, 3, square
stat_health 2, 0
stat_pri 9, 3, arrow, 160, 30, missile, missile_mechanical, piercing, none, 25, 1
;stat_pri_ex 0, 0, 0
stat_pri_attr ap
stat_sec 12, 3, no, 0, 0, melee, melee_blade, piercing, sword, 25, 1
;stat_sec_ex 0, 0, 0
stat_sec_attr no
stat_pri_armour 8, 9, 0, metal
;stat_armour_ex 8, 0, 0, 0, 9, 0, 0, metal
stat_sec_armour 0, 0, flesh
stat_heat 6
stat_ground 1, -2, 3, 2
stat_mental 11, normal, highly_trained
stat_charge_dist 30
stat_fire_delay 0
stat_food 60, 300
stat_cost 1, 800, 175, 100, 75, 800, 4, 200
armour_ug_levels 4
armour_ug_models Scots_Guard
ownership france
era 2 france
;unit_info 12, 9, 17
then i copyed the ui\units\france\#scots_guard.tga to the scotland section and i copyed the unit info\france files to the scotland folder, and i edited theCode:type Scots Guard
dictionary Scots_Guard ; Scots Guard
category infantry
class missile
voice_type Heavy
banner faction main_missile
banner holy crusade
soldier Scots_Guard, 48, 0, 1.2
attributes sea_faring, hide_forest, very_hardy, can_withdraw
formation 1.2, 1.2, 2.4, 2.4, 3, square
stat_health 2, 0
stat_pri 9, 3, arrow, 160, 30, missile, missile_mechanical, piercing, none, 25, 1
;stat_pri_ex 0, 0, 0
stat_pri_attr ap
stat_sec 12, 3, no, 0, 0, melee, melee_blade, piercing, sword, 25, 1
;stat_sec_ex 0, 0, 0
stat_sec_attr no
stat_pri_armour 8, 9, 0, metal
;stat_armour_ex 8, 0, 0, 0, 9, 0, 0, metal
stat_sec_armour 0, 0, flesh
stat_heat 6
stat_ground 1, -2, 3, 2
stat_mental 11, normal, highly_trained
stat_charge_dist 30
stat_fire_delay 0
stat_food 60, 300
stat_cost 1, 800, 175, 100, 75, 800, 4, 200
armour_ug_levels 4
armour_ug_models Scots_Guard
ownership france, scotland
era 2 france, scotland
;unit_info 12, 9, 17
battle_models
toCode:11 scots_guard 1 3 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod0.mesh 121 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod1.mesh 1225 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod2.mesh 6400 1 6 france 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_france.texture 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_normal.texture 42 unit_sprites/france_Scots_Guard_sprite.spr 1 6 france 68 unit_models/AttachmentSets/Final European Archer_france_diff.texture 68 unit_models/AttachmentSets/Final European Archer_france_norm.texture 0 1 4 None 11 MTW2_Bowman 15 MTW2_Non_Shield 1 19 MTW2_Bowman_Primary 1 18 MTW2_Sword_Primary 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002
when i load the game and go to custom battles( i select era of units all) it dosnt show up what em i missing?Code:11 scots_guard 1 3 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod0.mesh 121 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod1.mesh 1225 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod2.mesh 6400 1 6 france, scotland 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_france.texture 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_normal.texture 42 unit_sprites/france_Scots_Guard_sprite.spr 1 6 france, scotland 68 unit_models/AttachmentSets/Final European Archer_france_diff.texture 68 unit_models/AttachmentSets/Final European Archer_france_norm.texture 0 1 4 None 11 MTW2_Bowman 15 MTW2_Non_Shield 1 19 MTW2_Bowman_Primary 1 18 MTW2_Sword_Primary 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002
OK, I think I have the modeldb file worked out, at least somewhat. I succeeded in making a new unit with it anyway. 2 tips for working with it that I think were holding me back:
1. Don't use word wrap. It puts extra spaces and crap in there. When I didn't do this the game would crash upon loading.
2. Don't put the new entry at the end, but in the middle somewhere. When it was at the end the units didn't seem to show up, they were invisible.
Thanks to Musashi for his help! :2thumbsup:
Here are some results!
https://img404.imageshack.us/img404/...previewvh5.jpg
Ok i have changed it around now its now looks like thisQuote:
Originally Posted by billiam_maillib
i have also tried it with out addingQuote:
11 scots_guard 1 3 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod0.mesh 121 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod1.mesh 1225 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod2.mesh 6400 1 6 scotland 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_france.texture 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_normal.texture 42 unit_sprites/france_Scots_Guard_sprite.spr 1 6 scotland 68 unit_models/AttachmentSets/Final European Archer_france_diff.texture 68 unit_models/AttachmentSets/Final European Archer_france_norm.texture 0 1 4 None 11 MTW2_Bowman 15 MTW2_Non_Shield 1 19 MTW2_Bowman_Primary 1 18 MTW2_Sword_Primary 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002 11 scots_guard 1 3 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod0.mesh 121 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod1.mesh 1225 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod2.mesh 6400 1 6 france 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_france.texture 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_normal.texture 42 unit_sprites/france_Scots_Guard_sprite.spr 1 6 france 68 unit_models/AttachmentSets/Final European Archer_france_diff.texture 68 unit_models/AttachmentSets/Final European Archer_france_norm.texture 0 1 4 None 11 MTW2_Bowman 15 MTW2_Non_Shield 1 19 MTW2_Bowman_Primary 1 18 MTW2_Sword_Primary 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002
with the top way i cant even load the game with the second way i can choose the units but when i go to fight it CTD and comes up with Error: unspecific error medieval 2 will now exit. what am i missing?Quote:
11 scots_guard 1 3 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod0.mesh 121 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod1.mesh 1225 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod2.mesh 6400 1 6 scotland 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_france.texture 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_normal.texture 42 unit_sprites/france_Scots_Guard_sprite.spr 1 6 scotland 68 unit_models/AttachmentSets/Final European Archer_france_diff.texture 68 unit_models/AttachmentSets/Final European Archer_france_norm.texture 0 1 4 None 11 MTW2_Bowman 15 MTW2_Non_Shield 1 19 MTW2_Bowman_Primary 1 18 MTW2_Sword_Primary 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002
No worries. Glad it worked out for you :)Quote:
Originally Posted by the_mango55
Ok i got my model to show up but u cant see the textures, why?
https://img401.imageshack.us/img401/7756/0001vc1.jpg
https://img125.imageshack.us/img125/9348/0002sy5.jpg
https://img182.imageshack.us/img182/4664/0003ro8.jpg
https://img405.imageshack.us/img405/3453/0004hm2.jpg
could some one actually respond to me this time cuz i dont know whats wrong.
Do you have the right textures in the texture folder?
ya, i just copyed the scots texture from frances folder scolands folder
wait scratch that, what textures i want to use the same textures for france and scotland, when i start a battle france has textures but scotland dosnt >.<
here is all i have done http://www.box.net/public/ybrb2v4p9i if some one wouldnt mind taking a look anf figuring out whats wrong and telling me how to fix it i would be in there det.
Your problem seems to be here
the 1 represents how many factions use this model, so it should be 2 since france also uses it.Quote:
1 6 scotland
the 6 represents the number of letters in the name of the faction, scotland has 8 letters.
Try this:
Also, you can't have 2 models named the same thing, which is why it wouldn't load with your top one.HTML Code:11 scots_guard 1 3 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod0.mesh 121 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod1.mesh 1225 61 unit_models/_Units/LN_3QPlate_HalfPlate/scots_guard_lod2.mesh 6400 1 6 france 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_france.texture 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_normal.texture 42 unit_sprites/france_Scots_Guard_sprite.spr 8 scotland 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_france.texture 92 unit_models/_Units/LN_3QPlate_HalfPlate/textures/mtw2_LN_halfplate_scotsguard_normal.texture 42 unit_sprites/france_Scots_Guard_sprite.spr 2 6 france 68 unit_models/AttachmentSets/Final European Archer_france_diff.texture 68 unit_models/AttachmentSets/Final European Archer_france_norm.texture 0 8 scotland 68 unit_models/AttachmentSets/Final European Archer_france_diff.texture 68 unit_models/AttachmentSets/Final European Archer_france_norm.texture 0 1 4 None 11 MTW2_Bowman 15 MTW2_Non_Shield 1 19 MTW2_Bowman_Primary 1 18 MTW2_Sword_Primary 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002
Musashi, is there any way to change weapon type of the unit, eg, give dismounted gothic knight an Axe or something?
thanks
Unfortunately not that anyone has discovered yet. The weapons appear to be encoded into the unit mesh (model) and we have no way of opening, editing, or saving those models yet.
Some of us have tried to break into them with a hex editor, but no luck whatsoever so far.
thanks mango, it didnt crash anymore but the texture still dosnt show for the scotish.
:oops: perhaps someone here can help me:
This doesn't seem to work, if you could find out what and explain to me what is wrong, I would be most grateful :yes:HTML Code:8 clansmen 1 4 65 unit_models/_Units/RN_Light_Lmail/sword_and_buckler_men_lod0.mesh 121 65 unit_models/_Units/RN_Light_Lmail/sword_and_buckler_men_lod1.mesh 900 65 unit_models/_Units/RN_Light_Lmail/sword_and_buckler_men_lod2.mesh 2500 65 unit_models/_Units/RN_Light_Lmail/sword_and_buckler_men_lod3.mesh 6400 2 8 scotland 70 unit_models/_Units/RN_Light_Lmail/textures/RN_Light_Lmail_scot.texture 72 unit_models/_Units/RN_Light_Lmail/textures/RN_Light_Lmail_normal.texture 52 unit_sprites/sicily_Sword_and_Buckler_Men_sprite.spr 1 8 scotland 59 unit_models/AttachmentSets/Final Iberian_spain_diff.texture 59 unit_models/AttachmentSets/Final Iberian_spain_norm.texture 0 1 4 None 14 MTW2_Swordsman 0 2 18 MTW2_Sword_Primary 14 fs_test_shield 0 16 -0.090000004 0 0 -0.34999999 0.80000001 0.60000002