Printable View
This is a free flash-based game that I've been wasting alot. So far, I've gotten thru 17 of the 21 puzzles. Good fun. :2thumbsup:
If anyone comes up with any innovative designs to the harder puzzles, it might be fun to compare and see how different orgahs go about solving them. :beam:
This amuses me greatly: http://fantasticcontraption.com/?designId=268928
Yeh, good fun. Been playing during lectures.
:laugh4:Quote:
Originally Posted by Kekvit Irae
Alright I have this game figured out. The answer is ALWAYS more wheels!
Here's something I thought was pretty interesting when I did it (Mission to Mars level):
http://FantasticContraption.com/?designId=2632657
nvm
Nice.Quote:
Originally Posted by CountArach
I usually play all those games on Kongregate :grin:
I remember playing a game similar to this one called the awesome contraption machine or something like that. Pretty fun, but iirc, it gets horrendously difficult later one
Been playing it last week at Kongregate
Normally I go for the simplest approach.
1,2,3
Rotator
Some are a bit more complex
Levered
Conveyor Belt
Bulldozer
Just did Level 21 U-Turn after doing the previous post. I wanted something simpler but here it is:
Two Triangles
Wow, I thought no one else knew of this great game. I have finished it 5 times and its still good fun, thought my contraptions aren't anywhere near as good.
I think Level 21 is fairly easy... the tube one is getting me stuck... or unstuck. I can see a brute force approach but that ain't what I want.
Here is 21 again:
Double Simple
http://FantasticContraption.com/?designId=2662519
Didn't turn out how i wanted... To heavy
Ehehehe
http://FantasticContraption.com/?designId=2664036
As you can tell I like treads
Simple Solution to the Higher Problem:
http://FantasticContraption.com/?designId=2665293
A simple tread solution to the Higher Problem:
http://FantasticContraption.com/?designId=2665293
I just finished mission "unpossible". I started out with this lovely trebuchet (check out how far it can fling that ball!). But when I attached a tether, it lacked the raw power to do the job. So I built the infernal machine. :sweatdrop:
I had a similar take on that one- I called it the TBM. :beam:Quote:
Originally Posted by Papewaio
Treads? :smash:Quote:
Originally Posted by Veho Nex
oops
Ok i've done em all... only one im stuck on now is the tube....
I cant seem to figure out how to get it up...
Can some one help me!!!!
ohh and heres my test and fail of awash
Heres the first part when i was still figuring out how i would by pass all that great weight
http://FantasticContraption.com/?designId=2709213
Then came stabilization of my tank
http://FantasticContraption.com/?designId=2709731
But i noticed the circles would block up the tread so i needed a way to keep them off so heres the final beast
http://FantasticContraption.com/?designId=2709870
Now does anyone else see one which can push the weight up the hill cause i haven't.
Some other inventions of mine:
http://FantasticContraption.com/?designId=2711857
http://FantasticContraption.com/?designId=2712117
Nothing fancy.
EDIT: http://FantasticContraption.com/?designId=2713475 It's like a tank plowing through a crowd of college protesters.
I don't know if you saw my killdozer design from junkyard, but allow me to present killdozer2 -son of killdozer. :beam:Quote:
Originally Posted by Veho Nex
The secret is linking the wheels so the power gets to where it's needed. :yes:
I've now finished all the stock levels, so I've just been going back over some of them again to make more "fun" designs. :2thumbsup:
I should prolly spring for the full version.....
I'm stuck on Unpossible and Back and Forth
I've got a new method which has brought treads to its knee's
Awesome game. Pape is a genius
I'll post it if you can't get it.Quote:
Originally Posted by Ichigo
I finally got Down Under:
http://FantasticContraption.com/?designId=2736513
It took me forever tinkering around with the weights and rope lengths.
Mine is a little more simplistic: http://FantasticContraption.com/?designId=2719330Quote:
Originally Posted by CountArach
Gah! Why didn't I think of that?Quote:
Originally Posted by Kekvit Irae
Does anybody have anything for tube?
Here is what I have so far:
Tri-Color
Up Ramp
See-Saw
Jack and Jill ****
The Prowler **
Fate
Ramrod **
Easiest *****
Wahoo
I am incapable of figuring out the really hard designs at this point in time.
Driller
A way to get through Awash with only 6 spinners. Takes a while, but it works!
I got through Tube, but I didn't save it. 3 spinners in a triangle with the ball in the middle. Triangles are your friend here, you can walk up the walls like people do with their hands. You can stop up the bottom of the hole with a wood triangle, there is a little bit of a ledge.
Edit-> here's a second take, not quite what i did first.
http://FantasticContraption.com/?designId=2763442
Tube was one for me that was kick yourself simple once I got it, but it seemed impossible for quite awhile.Quote:
Originally Posted by TuffStuffMcGruff
Here is a solution for it using just 2 spinners and one stick. Simple, but boring.
This tube design has a little more pizazz, I much prefer it. :beam:
Thanks. Has anybody figured our un-possible?
EDIT!::: For tuffstuff
Not mine
http://FantasticContraption.com/?designId=2767830
Oh - i didn't buy it yet, that's why I cant see the solutions.
Quote:
Originally Posted by TuffStuffMcGruff
This was what I used to get thru unpossible.
Not only done it, but I have a solution for Unpossible that stays within the pink end zone.
Got to say it is quite messy and inelegant.
In the Zone
This is a copy of my favorite design. I did this, but the idea was already done and I copied it.
The "Z"
http://FantasticContraption.com/?designId=2790835
Up the Stairs was annoying me. It's doable, but the usual contraptions were taking too long. Now I know why ED-209 couldn't use stairwells...
So I made this one.