Tutorial: Converting a Roman Faction to a Different Culture

Converting a Roman Faction to a Different Culture

The purpose of this tutorial is to show how a Roman faction can be converted into a faction belonging to a different culture. In fact, the tutorial is meant to outline how the culture of any faction can be changed, but since there are additional complications for the Romans, we'll demonstrate how to do it using them. As an example, we'll convert the Brutii into a faction of the Greek culture, the Syracusans.

A couple of assumptions:

1. All modifications described are to the RTW 1.5 Imperial Campaign.
2. Since any former Roman factions will still have the Senate Tab if the Senate faction is retained, I'm removing the Senate from the game.

Tools: tga editor (e.g. photoshop), text editor (notepad, wordpad), Vercingetorix's xpak.

Acknowledgements
Thanks to:
bouis for his Howto on making Roman factions independent of the Senate.
Epistolary Richard for his terrific tutorial "Adding new units for beginners" which is very useful for understanding how textures, unit cards, and unit information files work.
Myrddraal for his How to on adding and removing names from a faction.
wlesmana who pointed out that I'd originally failed to remove the Senate Offices button, which caused a crash if one clicked it, and
Makanyane, who proved out a method to fix this problem.


This is a big tutorial so I'm bound to make some mistakes. Please let me know if you find one and I'll be happy to correct it. Also, if I have described anything poorly, tell me and I'll try to clarify the text.

Since there is a lot of work to do here, I'm going to try to split it into parts so that the game is playable after each group of modifications.


Removing the Senate
First of all, we'll remove the Senate from the game and give Latium to the Julii.

Files to change:
Data\world\maps\campaign\imperial_campaign\descr_strat.txt

Open descr_strat.txt. Remove the Senate from the game by removing the three instances of the line

Code:

---

superfaction romans_senate

---

which occurs under each of the lines

Code:

---

faction romans_brutii, balanced stalin
faction romans_julii, comfortable caesar
faction romans_scipii, bureaucrat napoleon

---

Cut the settlement description block from the Senate's faction description and paste it into the Julii faction description with the other Julii settlements. If you make it the first Julii settlement listed, Rome will become the new Julii capital.

Then remove all of the remaining Senate faction information. This is everything from

Code:

---

faction        romans_senate, comfortable napoleon

---

to

Code:

---

relative        Servius Maxentius,        Marciana,                Lentulus Maxentius,        Papiria,        end

---

If you run RTW now, you'll see that the Senate tab is grayed out for the three remaining Roman factions. Note that the colored map on the faction selection menu is now wrong for the Julii since it doesn't show Latium in red. We'll need to change this, but since we're going to make more changes in province ownership, we'll deal with it later.


Renaming the Senate Faction
By removing the Senate faction from the game, we've caused the Senate tab to be grayed-out. Unfortunately, this has no effect on the Senate Offices button in the lower left corner when you click the faction button for the Julii, Brutii, or Scipii. If you click the Senate Offices button the game will now crash. Let's fix that.

Files to change:
Data\DESCR_BANNERS.TXT
Data\DESCR_BUILDING_BATTLE.TXT
Data\DESCR_CHARACTER.TXT
Data\DESCR_LBC_DB.TXT
Data\DESCR_MODEL_BATTLE.TXT
Data\DESCR_MODEL_STRAT.TXT
Data\DESCR_NAMES.TXT
Data\DESCR_OFFMAP_MODELS.TXT
Data\DESCR_SM_FACTIONS.TXT
Data\EXPORT_DESCR_BUILDINGS.TXT
Data\EXPORT_DESCR_SOUNDS_PREBATTLE.TXT
Data\EXPORT_DESCR_UNIT.TXT
Data\world\maps\campaign\imperial_campaign\descr_strat.txt
Data\world\maps\campaign\imperial_campaign\descr_win_conditions.txt

For all these files except the last one, simply search for the single word "romans_senate" (I don't recommend changing it in a file path) and replace it with something else, "illyrians" perhaps. For descr_win_conditons.txt, you need to add an entry for the "illyrians". I've used this:

Code:

---

illyrians
take_rome
short_campaign outlive_factions
gauls

---

If you'd prefer, you can download the set of files that Makanyane has already modified, renaming "romans_senate" to "slavs" and making it immediately playable. If you do this, you'll need to re-apply some of the changes described in the previous section. There is a link to these files in this post, which occurs later in this thread.

If you start the game playing as a Roman faction now, you'll see that both the Senate tab and the Senate Offices button are gone. In addition, the former Senate faction can now be made playable with just a little effort, should you wish to do so later on.


Moving the Brutii to Sicilia Graecus
Take Sicilia Graecus from the Greek Cities and give it to the Brutii.

Files to change:
Data\world\maps\campaign\imperial_campaign\descr_strat.txt
Data\world\maps\campaign\imperial_campaign\map_romans_julii.txt
Data\world\maps\campaign\imperial_campaign\map_romans_brutii.tga
Data\world\maps\campaign\imperial_campaign\map_greek_cities.tga

An army of the Greek Cities commanded by Dionysios of Sparta and the diplomat Diodorus of Gela are located in Sicilia Graecus. The army must be removed from Sicilia Graecus, but we'll leave the diplomat where he is. You can remove the entry for the army from descr_strat.txt or you can move it somewhere else by changing its x and y map coordinates. I'm going to move it to Laconia at x 138, y 46.

Now cut the settlement block for Sicilia Graecus from the Greek Cities faction description and paste it into the Brutii's.

Next, cut the settlement blocks for Apulia and Bruttium from the Brutii faction description and paste them after the last settlement block in the Julii faction description.

All the Brutii family members and armies are now in Julii territory, so we need to move them to Sicilia Graecus. In order to keep things simple, I'm just going to delete all but one of the Brutii family members and armies. They can be added back in later, preferably after we've made the culture change.

We'll keep the faction leader Tiberius Brutus and his army. Change his coordinates to x 106, y 44 to place him and his army in the city of Syracuse. We'll leave the diplomat, spy, and navy alone. At this point the faction description for the Brutii should be very short:

Code:

---

faction        romans_brutii, balanced stalin
denari        5000

settlement
{
        level city
        region Sicilia_Graecus

        year_founded 0
        population 6000
        plan_set default_set
        faction_creator macedon
        building
        {
                type core_building governors_palace
        }
        building
        {
                type defenses stone_wall
        }
        building
        {
                type barracks muster_field
        }
        building
        {
                type port_buildings port
        }
        building
        {
                type hinterland_farms farms
        }
        building
        {
                type hinterland_roads roads
        }
}

character        Tiberius Brutus, named character, leader, age 52, , x 106, y 44
traits GoodCommander 1 , NaturalMilitarySkill 1 , GoodAttacker 1 , PoliticsSkill 2 , Intelligent 1
ancillaries drillmaster
army
unit                roman generals guard cavalry early                                exp 1 armour 0 weapon_lvl 0
unit                roman hastati                                exp 1 armour 0 weapon_lvl 0
unit                roman velite                                exp 1 armour 0 weapon_lvl 0

character        Marcus Attius, admiral, age 29, , x 120, y 64

army
unit                naval biremes                                exp 0 armour 0 weapon_lvl 0
unit                naval biremes                                exp 0 armour 0 weapon_lvl 0
unit                naval biremes                                exp 0 armour 0 weapon_lvl 0

character        Luca Antonius, spy, age 23, , x 116, y 62
traits GoodSpy 4

character        Caius Flaminius, diplomat, age 23, , x 112, y 63
traits GoodDiplomat 3

character_record                Galla,        female, command 0, influence 0, management 0, subterfuge 0, age 50, alive, never_a_leader

relative        Tiberius Brutus,        Galla,        end

---

We're done reassigning provinces, so now we can edit the files that show province ownership on the faction selection screen for the Julii, Brutii, and Greek Cities. These files are map_romans_julii.tga, map_romans_brutii.tga, and map_greek_cities.tga. You can use any program that edits *.tga files; I use Photoshop Elements. I don't have any good suggestions about how to do this, mine don't look very good. But this is also something that can be cleaned up when the tricky stuff is done.

The game should be playable again, so some testing is in order before we move on.


Making Brutii Characters Look Greek
The Brutii now control Sicilia Graecus, so I'm going to call them the Syracusans from this point on. The Syracusans are still members of the Roman culture. In this section we begin to change the appearance of the Syracusan characters. We've already decided to make them members of the Greek culture, but now we must also choose a faction-specific "look". It's possible to design and assign new models and textures, but I'm going keep it simple and just make the Syracusan characters look like the characters of the Greek Cities faction.

Files to change:
Data\descr_character.txt
Data\descr_model_strat.txt
Data\descr_model_battle.txt

We need to change the strategy map model for Syracusan characters from the Roman one to the Greek. Open descr_character.txt and change the dictionary, strat_model, and battle_model lines for the Syracusan generals from:

Code:

---

faction                        romans_brutii
dictionary                15
strat_model                sm_roman_general
battle_model        roman_general
battle_equip        gladius, chainmail shirt helmet and rectangular shield

---

to

Code:

---

faction                        romans_brutii
dictionary                2
strat_model                sm_greek_general
battle_model        greek_general
battle_equip        gladius, chainmail shirt helmet and rectangular shield

---

A similar thing should be done for the (lesser) general, spy, assassin, diplomat, and admiral. In each case the romans_brutii entry should exactly match the greek_cities entry.

Now we need to change the textures used by the strategy map models. Open descr_model_strat.txt. For the diplomat, spy, and assassin, change the romans_brutii texture file to match the greek_cities one. As an example, for the diplomat, change

Code:

---

texture                                romans_brutii, data/models_strat/textures/diplomat_brutii.tga

---

to

Code:

---

texture                                romans_brutii, data/models_strat/textures/diplomat_greek.tga

---

To the GREEK GENERALS section add a texture line identical to greek_cities but subtitute romans_brutii for greek_cities.

For sm_greek_general use:

Code:

---

texture                                romans_brutii, data/models_unit/textures/officer_greek_general_greece.tga

---

and for sm_greek_lesser_general:

Code:

---

texture                                romans_brutii, data/models_unit/textures/unit_greek_militia_hoplite_greek.tga

---

Don't do anything to the ROMAN GENERALS section.

In the ADMIRALS section, add this texture line to greek_cities_admiral:

Code:

---

texture                                romans_brutii, data/models_strat/textures/navy_illyria.tga

---

Finally, we need to specify the texture used by the Syracusan generals on the battlefield. Open descr_model_battle.txt and add the following texture line to the greek_general model:

Code:

---

texture                                romans_brutii, data/models_unit/textures/officer_greek_general_greece.tga

---

and to the greek_lesser_general model, add:

Code:

---

texture                                romans_brutii, data/models_unit/textures/officer_greek_lesser_general_greece.tga

---

This is a good time to take a break and do some testing. You should see that the Syracusan characters look like their Greek Cities counterparts on both the strategy map and the battle map. The generals are particularly distinctive.


Renaming the Brutii
Now we'll change most, if not all, of the text in the game referring to the Brutii and have it refer to the Syracusans instead. We'll also give the Syracusans Greek rather than Roman names.

Files to change:
Data\text\campaign_descriptions.txt
Data\text\expanded_bi.txt
Data\descr_names.txt
Data\world\maps\campaign\imperial_campaign\descr_strat.txt

First let's change the faction name and faction description of the Syracusans. Open campaign_descriptions.txt. After{IMPERIAL_CAMPAIGN_BRUTII_TITLE} replace "The House of Brutii" with "The Syracusans" and replace the text after {IMPERIAL_CAMPAIGN_BRUTII_DESCR} with something suitable.

Now open expanded_bi.txt. This is a large file and there are so many changes required that I can't outline them all. Searching for "Brutii" and "Roman (Brutii)" and replacing them with "The Syracusans" or "Syracusan" or something similar will take care of most of the changes. A few others are a bit trickier, like the victory and defeat text and the army composition description from the faction selection screen. Fortunately, this is all cosmetic and problems can be tracked down and fixed at your leisure. It's easy to get carried away with search and replace, so be careful not change anything in braces, such as {EMT_ROMANS_BRUTII_ASSASSIN}.

Next, make sure that our Syracusan characters are given proper Greek names. Open descr_names.txt, remove all existing names for the romans_brutii, and substitute all the names for the greek_cities faction.

To do this find romans_brutii in the file:

Code:

---

faction: romans_brutii

        characters
                Amulius
                ...
                ...
                ...
                Vistilia

faction: romans_scipii

---

Get rid of everything beneath "characters" from Amulius to Vistilia. Be careful not to change any of the names for the romans_julii and romans_scipii factions, which will be almost identical.

Then search for greek_cities:

Code:

---

faction: greek_cities

        characters
                Acaeus
                ...
                ...
                ...
                Xantippe

faction: seleucid

---

Copy everything beneath "characters" from Acaeus to Xantippe and paste it under the "characters" line just below the "faction: romans_brutii" line.

Finally, we need to change the names of the Syracusan characters who exist at the start of the game. Open desc_strat.txt and change "Tiberius Brutus" to "Hiero of Syracuse" or whatever Greek name you like. We need to change "Galla" to something else also ("Penelope"). Note that Tiberius Brutus and Galla have their names appear in two places - change them both.

There are three other necessary name changes. Here they are with an example of a valid new name in parentheses:
Marcus Attius (Thestor of Miletus)
Luca Antonius (Pleistos of Pydna)
Caius Flaminius (Nearchos of Himera)

This is another good time to stop and test. Make sure that the text in the game shows up correctly and that the name changes you've made appear as expected. You should almost immediately get an adoptee: make sure he has a greek name. If you make Penelope younger, she'll be more likely to have a child in a few turns - make sure the child's name is greek. Check that captain's names are correct, etc.


Make Greek Units Recruitable by the Syracusans
We have succeeded so far in making Syracusan characters look greek. It's finally time to make the Syracusans members of the greek culture.

Files to change:
Data\world\maps\campaign\imperial_campaign\descr_strat.txt
Data\export_descr_unit.txt
Data\export_descr_buildings.txt
Data\descr_model_battle.txt
Data\desc_sm_factions.txt

We begin by removing Roman units from the Syracusan army and preventing the Syracusans from recruiting them.

Open descr_strat.txt and remove the two remaining Roman units (one of hastati and one of velites) from the army. Also, change Hiero's bodyguard unit from "roman generals guard cavalry early" to "greek general's guard cavalry early". You can rebuild the army with greek units later.

Now open export_descr_unit.txt and remove romans_brutii from every "ownership" line in the file. This prevents the Syracusans from recruiting any units at all.

We also need to prevent the Syracusans from constructing Roman buildings and enable them to construct Greek ones. We'll give the Syracusans exactly the same buildings as the Greek Cities faction. Open export_descr_buildings.txt. Everywhere that romans_brutii is found without greek_cities it should be removed, and everywhere we find greek_cities without romans_brutii, romans_brutii should be added. There is only one tricky case, lines like:

Code:

---

        recruit "roman velite gladiator"  0  requires factions { romans_brutii, }

---

Here the best thing to do is simply comment out the entire line.

Before we enable the Syracusans to recruit Greek units, we need to give any Syracusan officers a proper texture.

There is only one greek officer type: greek_standard. Open descr_model_battle.txt and find the entry for greek_standard. We want to specify a texture for this model when it's used to represent a Syracusan officer. The texture we want to use is the same one used by an officer of the greek_cities. So we must add this texture line:

Code:

---

texture                                romans_brutii, data/models_unit/textures/officer_greek_standard_greece.tga

---

Note that this model already has a model_sprite line for the romans_brutii. Probably the best thing to do in this case is to comment out this line, so the sprite is generated on the fly as is done when the greek_cities use this model. This shouldn't cause a performance problem since it's only a single figure. I've also tried leaving this model_sprite line alone and noticed no difference in appearance.

We are now ready to change the Syracusans from the Roman to the Greek culture. Open desc_sm_factions.txt; in the "culture" line for the romans_brutii faction, replace "roman" with "greek".

While you're in this file, you may also wish to change some of the video clips. I think the defeat_movie is OK for the Syracusans, but I would change the intro_movie, victory_movie, and death_movie to those used by the greek_cities. You can look at them and decide for yourself.

Now we will begin making greek units recruitable by the Syracusan army. For each unit type we make recruitable, we need to do several things: allow the Syracusans to own that unit type, provide the Syracusans with a texture for the model used by the unit, and allow the Syracusans access to that unit's unit card and unit information card.

The last task will require us to unpack the Data\packs folder, so we'll do that now. This thread (post #4) tells you how to download and use Vercingetorix's xpak. Go ahead and unpack the packs folder now. Next, we'll create a directory structure to put new unit card and unit information card files into. This isn't strictly necessary, but if we make a mistake we'll be able to clean up and start over without disturbing the original files. In the Data folder, make a UI folder. In the UI folder make a UNIT_INFO folder and a UNIT folder. In both the UNIT_INFO and UNITS folders create a ROMANS_BRUTII folder.

The folder structure should look like this:

Code:

---

Data---UI---UNIT_INFO---ROMANS_BRUTII
          |
          --UNITS-------ROMANS_BRUTII

---

We'll use this set of folders shortly.

The Syracusan army has just one unit right now, Hiero's bodyguard unit. We can start with that.

Open export_descr_unit.txt and find the unit "greek general's guard early". The last line in the unit description is the ownership line; add romans_brutii to the list of factions that can own this unit. Note this unit uses the model greek_medium_cavalry (indicated in the "soldier" line). Next, we need to supply a texture for this model when it's used by the Syracusans.

Open descr_model_battle.txt and find the entry for the model greek_medium_cavalry. Add a texture line for the romans_brutii which uses the same texture as the greek_cities:

Code:

---

texture                                romans_brutii, data/models_unit/textures/unit_greek_medium_cavalry_greek.tga

---

Also add a model_sprite line for the romans_brutii which uses the same sprite as the greek_cities:

Code:

---

model_sprite                romans_brutii, 60.0, data/sprites/greek_cities_greek_medium_cavalry_sprite.spr

---

Now we copy the unit card and unit information card for the general's bodyguard unit. Go to Data\packs\DATA\UI\UNIT_INFO\GREEK_CITIES. Copy the file GREEK_GENERALS_GUARD_CAVALRY_EARLY_INFO.TGA and paste it into the new folder Data\UI\UNIT_INFO\ROMANS_BRUTII. Now got to Data\packs\DATA\UI\UNITS\GREEK_CITIES, copy #GREEK_GENERALS_GUARD_CAVALRY_EARLY.TGA, and paste it into Data\UI\UNITS\ROMANS_BRUTII.

You could do all of this en masse, but it's pretty easy to make mistakes that will cause the game to crash - just a simple typo will do it. The tedious but safe way to do it is to add one unit type to descr_strat.txt, make it recruitable, give it a texture, a unit card, a unit information card, and test. Make sure the unit card and unit information card are correct; you'll get a peasant on the cards if the game can't find the right one. Then make sure the unit looks OK on the battle map. If you have a texture problem, the unit might have the wrong colors, or it may be black or translucent. If the unit's sprite is wrong you'll get a peculiar color shift as you zoom into or away from the unit. This way, if you make a mistake you immediately know which unit is causing the problem.

The game should be stable again at this point, so go ahead and test. Playing as the Syracusans, you should see that Hiero has a Greek portrait and that Greek buildings now appear as construction options. The unit recruitment queue has a problem: the unit cards for peasants and militia hoplites are wrong. This problem can be remedied by repeating what we just did for the general's bodyguard unit for the peasant and militia hoplite unit types, but this should be done later. Move Hiero out of Syracuse and right-click on his unit card. If you click the helmet icon, the unit information card for the general's bodyguard should pop up. Make sure this is OK. Finally, get into a fight by having Hiero attack the Scipii army just outside of Messana. Make sure that the general and bodyguard unit look OK on the battle map during the deployment phase by checking the textures and sprites.

Earlier we assigned textures for the greek officer type and for the greek lesser general. We'd also like to make sure these are OK. In order to check them both at the same time, we need to add a unit type that has an officer attached. So open descr_strat.txt and add a "greek hoplite elite" unit to Hiero's army in Syracuse. Repeat what we did for the general's bodyguard unit: add romans_brutii to the unit's ownership line in export_descr_unit.txt, in descr_model_battle.txt, give the unit's model (greek_armoured_hoplite) texture and sprite lines for the romans_brutii which use the same texture and sprite as the greek_cities entry does, and copy the appropriate unit card and unit information card files from Data\packs\DATA\UI\UNIT_INFO\GREEK_CITIES and Data\packs\DATA\UI\UNITS\GREEK_CITIES to Data\UI\UNIT_INFO\ROMANS_BRUTII and Data\UI\UNITS\ROMANS_BRUTII.

Test again. Make sure the unit card and unit information card for the Greek Hoplite Elite unit is correct. Leaving Hiero in Syracuse, march this unit out to tangle with the Scipii near Messana. During the deployment phase, make sure the textures are correct for the greek officer, greek lesser general and the greek hoplite elite unit. Check the sprites for the hoplites. There is a bit of a problem with the greek officer (standard bearer actually): he's carrying a Greek Cities standard. Unfortunately, this is what we asked for when we copied the Greek Cities texture for this model. There are ways to get around this but I'm not going to discuss them here.

Now repeat this process for each remaining unit recruitable by the Greek Cities faction. In some cases, you won't need to add romans_brutii to the unit's ownership line in export_descr_unit.txt. If "greek" already appears in the ownership line, it will already be recruitable by the Syracusans. When you're finished, you can create a suitable Syracusan army to begin the game with.


Some Details
There are just a few more items that ought to be addressed.

Victory Conditions
Victory conditions need to be modified in order to work properly. In the vanilla game, the Brutii must satisfy the "imperator" victory condition - see Data\world\maps\campaign\imperial_campaign\descr_win_conditions.txt. Since the Brutii have now become the non-Roman Syracusans, this will no longer work. Instead, use "take_rome" as all of the other non-roman factions do. Oddly, the "imperator" victory condition also no longer works for the romans_julii faction. This is probably a consequence of removing the Senate. Instead, use a combination of the "hold_regions" and "take regions" victory conditions. (I'm not sure if "hold_regions" will work by itself, but "take_regions" definitely doesn't.) For instance, this works nicely:

Code:

---

romans_julii
hold_regions Latium
take_regions 50
short_campaign outlive_factions
gauls

---

Ancillaries
Many of the ancillaries are faction specific. There are 4 ancillaries specific to the Syracusans (formerly Brutii): Marcus Tullius Cicero and the Priests of Juno, Mercury, and Mars. Cicero should be transferred to one of the remaining Roman factions by changing the Trigger trigger_m_tullius_cicero in export_descr_ancillaries.txt. The line

Code:

---

        and FactionType romans_brutii

---

should be changed to

Code:

---

        and FactionType romans_julii

---

in order to transfer him to the Julii.

We have already changed the temple types that the Syracusans can build to be the same as those of the Greek Cities faction. To be consistent, we should probably also change the Priest ancillaries that the Syracusan characters can acquire. To do this we comment out the triggers for the Priests of Juno, Mercury, and Mars in export_descr_ancillaries.txt. Next we need to create triggers which allow the the Syracusans to acquire the Priests of Athena, Aphrodite, Hermes, and Nike. To do this, just copy the existing triggers, giving each a slightly different name and changing the FactionType from greek_cities to romans_brutii. For example, to allow Syracusan characters to acquire a Priest of Athena, we would need to add a trigger like this:

Code:

---

;------------------------------------------
Trigger trigger_priest_of_AthenaSyracuse
    WhenToTest CharacterTurnEnd
    Condition EndedInSettlement
          and RemainingMPPercentage = 100
          and SettlementBuildingExists >= temple_of_leadership_temple
          and FactionType romans_brutii
          and IsGeneral

    AcquireAncillary priest_of_Athena chance  15
;------------------------------------------

---

Diplomatic Standing
Since the Syracusans were originally a Roman faction, they start the game allied with the Julii and the Scipii. There's nothing wrong with this, but you are free to change the Syracusans' diplomatic standing by editing the diplomacy section of descr_strat.txt - you'll find it at the very end of the file.

Leader Portraits
On the faction selection screen, when you select the Syracusans, you get a Roman portrait representing your faction leader. You ought to replace this portrait with a Greek one. Assuming you've unpacked the Data\packs folder, you can find the Greek portraits under Data\packs\DATA\UI\GREEK\PORTRAITS\PORTRAITS. There are YOUNG\GENERALS and OLD\GENERALS folders under that. Since Hiero is currently 52, you should select one from OLD\GENERALS. I believe that the portrait 000.TGA is used by default for the faction leader at the beginning of the game, so this portrait ought to appear as Hiero in the game as well. Copy the portrait of your choice to Data\world\maps\campaign\imperial_campaign\leader_pic_romans_brutii.tga (you may want to save a copy of the original first). This portrait will now be the one you see when you select the Syracusans from the faction selection screen.

That's it.


A few words about things that haven't been covered here:

You may wish to change faction banners, but the procedure I've outlined here doesn't deal with that. Some information on this can be found here.

A problem remains with the speeches of generals opposing the Syracusans: they may occasionally refer to the Syracusans as the Brutii ("Those overly proud Romans over there..."). The generals' speeches are moddable I believe, but I know nothing about it, and will leave this for another person or perhaps do it myself at another time.

[Edit: phrasing, link for banner editing, ancillaries, victory conditions]

Very, Very good tutorial there Atilius, I might try that out for myself, have you got any screenshots of the finished work?

Quote:

---

Originally Posted by Ianofsmeg16

have you got any screenshots of the finished work?

---

I really haven't changed much in the way of appearances; the Syracusans simply look like Greeks. They just happen to have the Brutii banner and their saddle blankets are green. Anything in particular you'd like to see?

I followed this tutorial and when i try to start the game it crashes :furious3: .
I'm not blaming u I'm just saying that i'm frustrated because I don't understand why. Can u help in any way? Don't worry about it i'll probably get it working myself anyway. Good tutorial. :2thumbsup:

Ahoy,

Great tutorial, but I'm getting a consistent CTD as well. It seems to be caused by something in the last few steps...

I tried going through the tutorial cloning the Brutii into the Britons, so I'll try it again doing exactly what you've laid out in the tutorial.


Cheers,

Bacchon

Rand al'Thor and Bacchon,

I'll try to help. First you'll need to determine the step which causes the CTD. The better you can narrow down the problem, the more I can help. Make sure you're using the show_err command-line option to start the game.

I'm definately using -show_err, but the game CTDs just before going from the loading screen to the game and doesn't throw an error.

I'm fairly sure the error is caused when editing either export_descr_unit or descr_model_battle the final time. As I said, I'll go through the tutorial again tonight and let you know what happens.


Thanks,

Bacchon

I went through it again, and it worked like a charm. I even did the units as one giant batch. ;)

I think the problem I was having, then, is related to the Briton chariots. Would the procedure for switching the roman general over to a British one be any differant?


Cheers,

Barret

Quote:

---

Originally Posted by Bacchon

I went through it again, and it worked like a charm.

---

Excellent, I'm glad to hear you got past the problem.

Quote:

---

Originally Posted by Bacchon

I even did the units as one giant batch. ;)

---

(Shudders)

Quote:

---

Originally Posted by Bacchon

I think the problem I was having, then, is related to the Briton chariots. Would the procedure for switching the roman general over to a British one be any differant?

---

I don't think so. Setting the Brutii general's texture to the same one the Briton general uses is easy - should be exactly the same as the tutorial.

Switching the general's bodyguard unit could be tricky. You've got to make the unit recruitable by the Brutii (add romans_brutii to the ownership line in export_descr_units.txt), and you'll need skins and sprites for the horses and crew. The crew shouldn't be hard; just make sure that barb_crew_heavy has a texture and a sprite line for the romans_brutii in descr_model_battle.txt.

I haven't played around with chariots before but it looks like the barbarian heavy chariot uses the light_horse model (see descr_mounts.txt) so you need to make sure that the romans_brutii also have texture and sprite lines for the light_horse model in descr_model_battle.txt.

You'll probably need to do something similar for the light chariot unit.

If you have a problem I'll help as best I can - good luck.

Hi Attilius, excellent tutorial.

I'd like to clarify one point about the question of eliminating the Senate.
I've tested many times, and I'm sure now that the Senate can be eliminated from a modded imperial campaign, but it is not possible to do the same in a provincial campaign (don't ask me why :inquisitive: ).

Cheers.:2thumbsup:

MW,

Thanks, I just wish I'd had my crappy original notes in good order when I sent them to you way back when.

Quote:

---

Originally Posted by Monkwarrior

I'd like to clarify one point about the question of eliminating the Senate.
I've tested many times, and I'm sure now that the Senate can be eliminated from a modded imperial campaign, but it is not possible to do the same in a provincial campaign (don't ask me why).

---

Has this been discussed in another thread? I seem to vaguely remember something like this, but it didn't really catch my attention. The strange thing is that I've had my unified Rome mod (with no Senate) set up as a provincial campaign from the very beginning. In fact, I'm currently running a long test game and have played from 264 BC to 171 BC with no problems.

The reason I restricted the tutorial to a modded imperial campaign was not because I had any difficulty with a modded provincial campaign, but to remove any ambiguity in directory paths to descr_strat.txt and other files in the campaign_name directory. In other words, I didn't want to have any directory paths like Data\world\maps\campaign\my_campaign or Data\world\maps\campaign\custom\my_campaign, I always wanted to refer to Data\world\maps\campaign\imperial_campaign for the sake of simplicity.

Anyway, if there was a thread on this subject, send me a link to it. I'll read up on it and perhaps we can determine why removing the Senate in a provincial campaign doesn't work for you.

Quote:

---

Originally Posted by Atilius

Has this been discussed in another thread? I seem to vaguely remember something like this, but it didn't really catch my attention. The strange thing is that I've had my unified Rome mod (with no Senate) set up as a provincial campaign from the very beginning. In fact, I'm currently running a long test game and have played from 264 BC to 171 BC with no problems.

---

Thanks Attilius, you are right and I'm wrong.:embarassed:
It is possible to have a provincial campaign without the senate, but the requirement is not using the superfaction parameter with any other faction.:wall:

We used this system to control de AI behaviour and this was the origin of the CTD when loading the campaign.

Sorry.

Quote:

---

Originally Posted by Monkwarrior

It is possible to have a provincial campaign without the senate, but the requirement is not using the superfaction parameter with any other faction.

---

I see. That's good to know; thanks MW.

I've updated the Tutorial, adding a couple of paragraphs dealing with faction-specific ancillaries in the "Details" section.

its better if you just remove the Brutii and Scipii from campaign.

I've updated the Tutorial to include a paragraph in the Details section on required changes to victory conditions.

I have a question that hopefully someone still around to answer:
I removed the Senate and all their dependencies, but my roman factions still have the Senate tab (not greyed out) and if I click on it, the game CTDs.

The romans_senate doesn't appear in my mod (not playable at all), although all the other 3 roman factions are still roman cultured.

Any ideas?

Quote:

---

Originally Posted by wlesmana

II removed the Senate and all their dependencies, but my roman factions still have the Senate tab (not greyed out) and if I click on it, the game CTDs.

---

Did if you remove the lines "superfaction romans_senate"? I believe that's all that should be necessary if you've removed the romans_senate faction.

Yes, I did.
The Senate is not even in the campaign. But the Senate offices button is still clickable, which results in CTD.

@wlesmana, I just checked and agree that does definitely happen, assume it must be a hardcoded thing relating to romans_senate being in descr_sm_factions in which case button appears for any roman faction. Changing romans_senate to another culture doesn't change anything. Though swapping julii to greek culture means they don't get tab any-more.

I assume that would be another case of having to internally re-name the senate to get rid of it (?), unless anyone else has other ideas...

(or swap the senate offices icon for a windows desktop one.. :P)

Quote:

---

(or swap the senate offices icon for a windows desktop one.. :P)

---

Actually, someone suggested that some time ago when we had the right-click problem for building conditionals...a bit involved for what alt+f4 would have done :: but in this case....if all else fails change the tool tip too - 'click here to exit directly to desk top' :)


Removing all the internal references to the_senate will be pain :(

Quote:

---

Removing all the internal references to the_senate will be pain :(

---

yep :laugh4: , i've done it for a -mod under BI before (unfortunately files are mixed in with other modded stuff or I would have posted them), Atilius has confirmed somewhere else that it will work under RTW.exe as well.

Approx list of files is in this post

The button could be modded graphically to blend seamlessly into the background - not a perfect solution of course as there is always the chance it could be clicked by accident.

I'm glad I'm a BI modder :)

I know EB has internally renamed romans_senate to saba so this wouldn't happen.

I looked at the interface files, but that one doesn't seem to be there, unless I am mistaken. It would probably be easy to change menu_english.txt (is that right?) to say do not click here. Who would click somewhere if it said do not click here?

I do like Mak's idea though. Just write, "return to desktop"/:laugh4:

RM3

Actually, that is what I did :p
https://img508.imageshack.us/img508/...lickph0.th.jpg

Quote:

---

Originally Posted by wlesmana

I removed the Senate and all their dependencies, but my roman factions still have the Senate tab (not greyed out) and if I click on it, the game CTDs.

---

Quote:

---

Originally Posted by wlesmana

But the Senate offices button is still clickable, which results in CTD.

---

Just to clarify: If you follow the steps outlined in the first section of the tutorial, the Senate tab should be greyed out, and won't cause a crash if you click on it. However, the senate offices button remains, and if you click on it you CTD.

Does this describe your situation? (It looks like it from your screen shot.)

I'd never noticed that the senate office button remained. I'll try to look into getting rid of it or making it harmless.

Aaah, ok, I misunderstood then. Yea, the Senate button is greyed out, although Senate Offices button still appear.

It SHOULD be possible to remove the button, as BI had clearly done so. And since using the BI.exe on RTW doesn't remove the button, it's not part of the exe.

Was experimenting to blend it into background - you can delete its bit of the alpha channel (its on stratpage_02.tga) - though that doesn't help a lot as the bounding circle - which is shared with the other icons - is still there and the centre is still clickable (+CTD),
https://img204.imageshack.us/img204/...icesfh4.th.jpg

https://img209.imageshack.us/img209/...ringtd8.th.jpg
removing the outer ring (by removing its part of the alpha) on sharedpage_01.tga makes some of the other buttons look horrible... and of course you still have clickable CTD area....

(I'd still recommend re-naming the little pests - as that comes up as topic at least twice a month I think I'm finally going to try doing the files for vanilla - I'll tell you how long it takes Wles... :yes: )

EDIT: Takes about 45 mins to re-name them (and 15 mins to work out you can't comment out entries in expanded_bi.txt, doh)

FILES: Neutralised Senate, changes internal name 'romans_senate' to 'slavs' (also enables emergence if you add hording under BI) that is for vanilla 1.5 only if you already have changed EDU, DMB etc you'll have to do your own :no: .

Thanks, Mak!!

Hey guys, I hope you're still around. I read that to change the overall culture for a faction you go into the descr_sm_factions.txt file. Correct?

I'm trying to convert the Parthians into the Greek "Spartans".

If descr_sm_factions.txt is correct, then why doesn't mine have the culture line? Here's what it's saying...

faction parthia
symbol data/models_strat/symbol_parthia.CAS
rebel_symbol data/models_strat/symbol_eastern_rebel.CAS
primary_colour red 168, green 62, blue 154
secondary_colour red 0, green 0, blue 0
logo_path data/ui/symbols/symbol_parthia.tga
triumph_value 5

The faction line is right under the faction line. Perhaps you accidentally deleted it. For Parthia it should read:

Code:

---

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

faction                                                parthia
culture                                                eastern
symbol                                                models_strat/symbol_parthia.CAS
rebel_symbol                                models_strat/symbol_eastern_rebel.CAS
primary_colour                                red 168, green 62, blue 154
secondary_colour                        red 0, green 0, blue 0
loading_logo                                loading_screen/symbols/symbol128_parthia.tga
standard_index                                8
logo_index                                        243
small_logo_index                        255
triumph_value                                5
intro_movie                                        fmv/intros/eastern_intro_640x480_bars.wmv
victory_movie                                fmv/victory/eastern_outro_320x240.wmv
defeat_movie                                fmv/lose/parthia_eliminated.wmv
death_movie                                        fmv/death/death_parthia_sand_320x240.wmv
custom_battle_availability        yes
can_sap                                                yes
prefers_naval_invasions                no
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

---

Zain your descr_sm_factions looks like one from patch 1.2 not 1.5.

Which patch are you meant to be using? I'd recommend 1.5 unless you have a good reason not to use that, as I think it fixed some bugs and is probably a bit more flexible about what you can do to it as well.

If you are using 1.2 I'm not sure where, how or if you can change the culture of a faction!

I've updated the tutorial to describe how to remove the Senate Offices button. I've also added acknowledgements to wlesmana for pointing out the problem and to Makanyane for verifying that the offending button disappears if the romans_senate faction is renamed.

I'm embarrassed to say that, in spite of reading her post several times, I had failed to realize she had verified a solution to the problem, uh, over three months ago.

Haha, I suppose I'm going to have to update... can I keep the modded files or do I have to reinstall to get the patch to work?

Best to start from scratch after installing 1.5.

:ave: I'm having a little trouble.

I copied the unit card and unit card info for hoplites into the romans_julii folder, but it still shows up as a gray peasant. Is there something else I need to do?

Btw, thanks for making this guide. :rtwyes:

If you're following the guide precisely, the unit card file needs to be copied to the newly created ROMANS_BRUTII folder. If you're giving ownership of this unit to the julii, I need more information.

(I know that, but I was also trying to make hoplites available for the julii.)

So far, I made hoplites available for the julii in custom battles, added everything I needed to add in export_descr_battle, and copied the unit info and the unit card, but it still shows up as a gray peasant. I'm not sure what I did wrong, I followed everything it said to do in the guide when making units available for factions that don't already have them.

check your spelling ...

also make sure the folders are where they should;
data\ui\units\romans_julii
data\ui\unit_info\romans_julii

also note the "#" in front of the unitcards label ...


G

Quote:

---

Originally Posted by Maxinius Scipio

So far, I made hoplites available for the julii in custom battles, added everything I needed to add in export_descr_battle, and copied the unit info and the unit card, but it still shows up as a gray peasant.

---

I'm confused about your mention of export_descr_battle. There should be no need to do anything to that file for a custom battle that you choose armies for every time you play one. Do you mean you are saving a battle in the same manner as the historical battles included with the game?

No, all I'm trying to do is make hoplites available for the julii on the campaign map and in custom battles. The only problem is that the hoplites keep showing up as gray peasants, and I know I copied the unit card and the unit info into the julii folder.

Attilus:
Can I just eliminate the brutii and scipii? I've tried to do this and tried to leave the Senate in, but no-go. I've updated all the descr_regions, EDU and EDB and changed all references for the Scipii and Brutii to Julii. All I get is a CTD.

OK,
I got it to work. Apparently, even though I gave the two southern cities to the Greek-Cities and changed the generals names to ones from the greek_cities names list, it didn't like thoses. So I gave two different names and the game loaded up fine.

I've got the julii and the senate controlling south of the Po River, and greek-cities have Croton and Tarentum. Scipii and Brutii are removed. Interestingly, I do get messages and interaction with the Senate with only one Roman faction, which is what I wanted. I guess that means it's not hard-coded to where the senate must have 3 roman factions to control.

Pardon the late response, I rarely hang out here these days.

Quote:

---

Originally Posted by GaiusJulius

Scipii and Brutii are removed. Interestingly, I do get messages and interaction with the Senate with only one Roman faction, which is what I wanted. I guess that means it's not hard-coded to where the senate must have 3 roman factions to control.

---

Yes, that's what I've observed. It's just that I've preferred to use all the available faction slots for something.

does this method also apply to BI? because i was trying to aff a faction that one of the mod team removed but i keep failing when its in the loading screen after i press the icon of BI

The principles should be the same - could you explain in more detail what you're trying to do?

Are you trying to add back a faction that was removed? I'm not sure if problem is necessarily related to this tutorial - it might be better to start a thread in modding questions about your problem.

Hi, i followed your tutorial, and the game doesn't crashes.
I tried to convert the Scipii to a new faction like the gauls: The Arveni.
Althouhg i can start the campaign, and the units look good on the battle map, the unit cards do not appear in the campaign map, neither can i recruit gallic units, or build their buildings...

Correction:
I can train both Gallic and Roman units.
And can only build Roman Building...
Can this be caused by the fact that my cities start with Roman buildings? I'm going to change the starting buildings to gallic, and see what changes (or not)...
Didn't solve the unit cards problem either...

UPDATE:
Can now build Gallic Buildings, train Gallic units, units look good on battle map.
But the cards still all look like peasants...

Quote:

---

Originally Posted by nomadewolf

UPDATE:
Can now build Gallic Buildings, train Gallic units, units look good on battle map.
But the cards still all look like peasants...

---

Did you miss this step below? You need to do it for every unit which was not originally recruitable by the faction you are re-using:

Now we copy the unit card and unit information card for the general's bodyguard unit. Go to Data\packs\DATA\UI\UNIT_INFO\GREEK_CITIES. Copy the file GREEK_GENERALS_GUARD_CAVALRY_EARLY_INFO.TGA and paste it into the new folder Data\UI\UNIT_INFO\ROMANS_BRUTII. Now got to Data\packs\DATA\UI\UNITS\GREEK_CITIES, copy #GREEK_GENERALS_GUARD_CAVALRY_EARLY.TGA, and paste it into Data\UI\UNITS\ROMANS_BRUTII.

This is in the section "Make Greek Units Recruitable by the Syracusans", and of course you'll need to substitute the proper unit and faction names.

Quote:

---

Originally Posted by Atilius

Did you miss this step below? You need to do it for every unit which was not originally recruitable by the faction you are re-using:

Now we copy the unit card and unit information card for the general's bodyguard unit. Go to Data\packs\DATA\UI\UNIT_INFO\GREEK_CITIES. Copy the file GREEK_GENERALS_GUARD_CAVALRY_EARLY_INFO.TGA and paste it into the new folder Data\UI\UNIT_INFO\ROMANS_BRUTII. Now got to Data\packs\DATA\UI\UNITS\GREEK_CITIES, copy #GREEK_GENERALS_GUARD_CAVALRY_EARLY.TGA, and paste it into Data\UI\UNITS\ROMANS_BRUTII.

This is in the section "Make Greek Units Recruitable by the Syracusans", and of course you'll need to substitute the proper unit and faction names.

---

The only step i missed (that i'm aware of) is the step of changing the culture (descr_sm_factions.txt or export_sm_factions.txt or somthing like that). But after i've done that step i was able to build gallic buildings, although the unit cards still showed peasants...

I was able to make the unit cards look as they should, but i had to repack with the new files in ui_2.pak (install_dir\Data\Packs folder).
But now, are the rebel unit cards that don't show properly... :sweatdrop:

Quote:

---

Originally Posted by Rand al'Thor

I followed this tutorial and when i try to start the game it crashes :furious3: .
I'm not blaming u I'm just saying that i'm frustrated because I don't understand why. Can u help in any way? Don't worry about it i'll probably get it working myself anyway. Good tutorial. :2thumbsup:

---

When you take the faction out of the ownership line make sure you replace it with something like slaves or when you play the game gets stuck on the loading screen

Great tutorial!

I have renamed the senate internally to Epirus and now I am getting this error at startup:
https://img580.imageshack.us/img580/6091/0i67.jpg
Does anyone know what I did wrong?
BTW, this is the line in question:

Quote:

---

##standard_julii.tga
{
romans_julii ##standard_julii.tga
romans_brutii ##standard_brutii.tga
romans_scipii ##standard_scipii.tga
epirus ##standard_senate.tga

---

Ok, my mistake. It was just a stupid typo. Now that I fixed it however I am having problems with the faction icon not appearing, and the game crashing whenever I start up a campaign or try to play as them. Any ideas what I did wrong? To the best of my knowledge I did not change any file paths.

It seems that I can start a campaign as anyone but them, and it will not crash unless I hover the mouse over the missing space where their icon should be in the campaign menu or hover my mouse over their settlements in the game. Their faction icon shows up in the diplomacy screen though, and I can click on it without a crash. I could really use some help here, because hours later I still cannot figure out what I did wrong.

I fixed it.