still can not change files...

umm yeah, i was kinda good at figuring out how to do stuff on RTW, but im confused with M2TW because I did the unpacker and i can edit the files, but it would change to vanilla stuff again, so i read someware to add the:
[io]

file_first = true

to the preferences, but i stillcan not have the changes appear in game, i think i may have put the io code in wrong, is thier supposed to be a space between the two lines? also i put it at read only so that problem of the code dissapearing does not happen to me, i thought i had it all covered but i quess not...

it's file_first = 1
not file_first = true

it still wont work, geeze this is frustrating.

Actually "true" works just as well as "1".
Usually, there shouldn't be an extra line between [io] and file_first = true. Don't think it matters though, but worth trying.

Make sure you are using the right config file though, as some bat files may read another config file than the default.

Also, make sure you actually got any files that need to be activated using file_first. If you can post a screenshot of your data folder (or the relevant file you are trying to incorporate) that would help.

removing the space did nothing, and here is the pic of the file that has the preferences file in it and the data file highlighted.

https://i31.photobucket.com/albums/c...2TWhelppic.jpg

this is a pic of that preferences file which has the io code:

https://i31.photobucket.com/albums/c...TWhelppic2.jpg

and here is the code (highlighted) i am trying to add in the export_descr_buildings file:

https://i31.photobucket.com/albums/c...TWhelppic3.jpg



P.S. I added the Papal States to the list of playable factions successfully, so I dont get why this keeps reverting back to vanilla settings.

OK,
So you are starting M2TW using the launcher, a bat file, or medieval2.exe directly?
Your preference file isn't valid I think. Unmark read-only, start M2TW, let it autodetect settings, then make your own settings changes, exit the game and then add the io code again, marking the file read-only.

Also, have you put the EDB file in the plain data folder?

One more thing. With changes to EDB regarding unit hiring, the changes only take effect after you end turn and/or finish the building you put the hiring under. Not when you just load up the game. So if Rome currently has a large stone wall and you add this code, the unit will be available for hire as soon as the huge stone wall is completed there (i.e. using process_cq). If Rome is already a huge city, you can only recruit the units there if you end turn.

Quote:

---

Originally Posted by FactionHeir

OK,
So you are starting M2TW using the launcher, a bat file, or medieval2.exe directly?
Your preference file isn't valid I think. Unmark read-only, start M2TW, let it autodetect settings, then make your own settings changes, exit the game and then add the io code again, marking the file read-only.

Also, have you put the EDB file in the plain data folder?

One more thing. With changes to EDB regarding unit hiring, the changes only take effect after you end turn and/or finish the building you put the hiring under. Not when you just load up the game. So if Rome currently has a large stone wall and you add this code, the unit will be available for hire as soon as the huge stone wall is completed there (i.e. using process_cq). If Rome is already a huge city, you can only recruit the units there if you end turn.

---

1. I use the launcher.

2. I unmarked read only, then started M2TW. I didnt get the make your own settings changes part so i just exited and then marked the thing read only again, the code was still there or was i supposed to delete that before i started?

Anyway, I just saw what you added on as i was finishing this, so i will check by ending the turn, and/or building the needed building.

Ok, I tried to build the unit after building the huge wall and ending the turn a couple times after building it, and still no luck, also the EDB file is in the data folder and not any subfolder.

When you examine the huge stone walls in game, does it list papal guards as hirable from the structure at all?

nope, it shows nothing, its all plain vanilla stuff, even when i end the turn.

Hmmm.
Did you try running M2TW using medieval2.exe directly as opposed to the launcher?

Alternatively, you can create a bat file to link to medieval2.exe and add onto the end of it:
--io.file_first

Although that is really the same as the config, maybe that works better for you. For some it does.

I tried using the .exe instead of the launcher and it didnt work. you will need to tell me how to do the .bat file you are talking about.

You will need to run your medieval game exe using a shortcut or a bat file.
The target of said file should read similar to this:

D:\Medieval\medieval2.exe --io.file_first

Where "D:\Medieval\" varies depending on your installation but medieval2.exe --io.file_first should be constant.

Wait, but I got a shortcut on my desk top. and I don't understand how I actually "make" this file, what do I click to make the file to name it "medieval2.exe --io.file_first"

Edit your shortcut.
Its target currently is either the launcher.exe or medieval2.exe
Change to medieval2.exe --io.file_first

Quote:

---

Originally Posted by FactionHeir

Edit your shortcut.
Its target currently is either the launcher.exe or medieval2.exe
Change to medieval2.exe --io.file_first

---

like this?

https://i31.photobucket.com/albums/c...TWhelppic4.jpg

Err no.
Undo what you did.
Then right click medieval2.exe and choose create shortcut.
Open the shortcut's properties and in the target section add
--io.file_first
after exe, making sure there is a space between the e and the -

like this?

https://i31.photobucket.com/albums/c...TWhelppic5.jpg

Yes. Just make sure that you got 2 - (i.e. --) and that the " is put after exe instead of after first

it says the name and path are not valid.

Try removing both " then. Its just a syntax error somewhere. Play around.

i had to rename the application from medieval2.exe to medieval.exe--io.file_first will that work?

meh, nothing is working, ill come back tomorrow to see if anyone has any fresh ideas, and maybe try to figure it out after a full nights sleep.

ok people, am i gonna have to uninstall and reinstall and do the unpacker and everything over again?

ok, first thing's first. let's start from the beginning. replace all moddified files with their original backups (please tell me made a back up folder for moddified files before changing things).

let me know when you have done this.

sigh, no, i did not make a back up folder for replacing modded files, but i did remove ALL changes i have made to the files so everything is exactly like vanilla before i even did anything, or is it still bad?

nah, vanilla is how i want it. if you haven't unpacked already, follow these steps:

goto the tools folder in your M2TW directory
right click on unpack_all.bat
choose Edit
replace what's there with this line:

unpacker.exe --source=..\..\packs\*.pack --destination=..\..\backup --verbosity=1

this will unpack everything to a folder called backup in your M2TW directory. these are your back up files. do not mod these directly. instead, copy the files you want to mod and paste them into your M2TW\data folder. in this case, you're wanting to play as the Papal States. create a backup of your descr_strat.txt file, and place the files export_descr_units.txt and export_descr_buildings.txt in your M2TW\data folder.

in descr_strat, add papal_stats to playable.


right click your desktop M2TW icon, choose properties, and paste this into the area labeled Target:

"C:\Program Files\SEGAa\Medieval II Total War\medieval2.exe" --io.file_first

in your M2TW directory, open a notepad and paste this:

[io]
file_first = 1

[log]
to = logs/system.log.txt
level = * error


save and name this file: mymod.cfg

open another notepad and paste this:

medieval2.exe @mymod.cfg

save and name this file: mymod.bat


this is a bit of redundancy meant to make sure we cover all angles and if one thing doesn't work, maybe the other will.


now, goto your export_descr_buildings.txt file and find the line:

recruitment_slots


it will be under all of the castle/city wall entries right at the beginning of the file. change this number on all city wall settings to be recruitment_slots 9 and save it. remember, you should be in your data folder, not your backup folder. you should have already copied the file from your backup to your data folder. the purpose of this is to test the mod switches.

now, run your desktop icon. tell us if it crashes. if you can start a new campaign as the Papal States, look at your recruitment queues and tell us if all 9 slots are lit up to be used. if they are, then then switch is working. if not, quit the game, goto your M2TW directory and double click mymod.bat. if this still won't run the game, let us know.

ok wait, i have already unpacked, should i still follow this?

ok just letting you know, im following the instructions right now , and it is unpacking right now. i put the code in for the unpacker like you said.

cool. i'm going to be gone until about 7pm Pacific Standard Time (California time, just in case). i'll check up when i get back.

ok,ok i did the --io.file_first thing for the short cut. i did everything except what to do right after making the backup folder. you want me to copy the vanilla EDB and EDU files from the backup folder into the data folder to mod? what do i do with the EDB and EDU files already in the data folder?

hello, you said you would be back by 7?

i'm sorry, i thought you re-installed. in that case there would be no EDS or EDB files in the data directory.

but yes, you want your modified files in the data directory. file_first tells the game engine to run the individual files before running the packs. thus anything you have altered in the data folder should show up in game.

so will i need to reinstall or can i delete the old files, put in the clean new ones and edit them?

no, you don't need to reinstall. i thought you did because you said everything was back to vanilla. to me that meant nothing was unpacked. so long as you have clean files backed up, and the files in your data folder are COMPLETELY unmodded, then you can just edit the files currently in your data folder and everything should work as i said.

k, thanks i'll tell you tomorrow if it works out!

It works perfectly right now, thank you. I'll be playing around with the files for months now that i can actually mod.

awesome.