My computer is making an odd buzzing noise, and which spiked a few minutes ago. It seems to be working fine, temperature normal, CPU and memory usage normal, but the buzzing continues. Any ideas on what this may be?
Printable View
My computer is making an odd buzzing noise, and which spiked a few minutes ago. It seems to be working fine, temperature normal, CPU and memory usage normal, but the buzzing continues. Any ideas on what this may be?
Maybe something got trapped in the fan cover and is making a buzzing noise from hitting the tips of the fan?
Either that, or there's a flying insect like a bee or fly trapped in there.
.
Might be the case fan. They enjoy making pathetic noises yet posing no problems. Must be a sort of mechanical androposis. :skull:
ADD: Hey Mikeus! :cheerleader:
.
Well, it was running silently mid-use, then suddenly started to buzz, loudly, and there was a small noise I couldn't identify, and then I flipped the power switch. It just started again, a louder buzzing/humming noise. Built up, died away. It's not the fans, I turned them off and it continued. It sounds almost like a jigsaw or skillsaw cutting through a thin piece of wood. When I power off the computer, it gradually dies down to a slow whine (like powering off a power saw), and then goes away. It doesn't happen with the computer on standby. I'm not sure if my fan controller has power over the PSU fan, so that might be it, but I don't know.
Just to be clear... This sound isn't coming from your speakers, is it? Or is it mechanical, from inside the case?
It is most definately from the case.Quote:
Originally Posted by Whacker
Check the graphics card fan and cpu fan as well. The graphics card fans in particular are often the cheaper sleeve type fans and will start to gyrate noisily after a year or so.
I've had the computer for little over two months or so, and my fan controller turned both these fans to 0%. Nothing happened.Quote:
Originally Posted by Caravel
I'm taking the side panel off to have a look around. (Note I'm on a different computer at the moment).
EDIT: I think it's coming from the area of the hard drive.
EDIT2: Order of events
1) Computer on standby (Everything's fine)
2) Computer powers on - still fine
3) Fans start - still fine
4) Seconds later - buzzing begins
Took the CD out of the drive. No change.
EDIT3: Yeah, pretty sure it's the hard drive, but what's wrong with it is beyond me. Help?
I downloaded Seatools from Seagate to test the drive.
That'd be my guess at this point. See what the diagnostics say, but a whining HD is something that always makes me nervous. That said, I had one before that I left run 24/7 for several months and it never failed until I finally decided to replace it. :shrug:Quote:
Originally Posted by Evil_Maniac From Mars
Try removing the HDD from the cradle and powering it up in your hand, if it still buzzes then you know it's the HDD that's the problem. If it stops then it may be vibrating due to being loosely/badly fitted in it's cradle.
Note: Back up your important data ASAP.
The buzzing seems to have stopped after I've let the computer run. All my data is safe. I'm running the Seagate tests right now, and it's fine so far. Thanks Caravel, I'll try that as soon as I can.
Be careful - it will shake itself to pieces if not replaced soon, resulting in the destruction of your PC as shrapnel flies everywhere.
Also, Hi Mouz.
This could point to it being the cradle, as those symptoms point to a loose fitting object ceasing to vibrate as it heats up and expands to fill the "gaps". Heat sinks often do this also, are you certain it's the HDD and not a heat sink?Quote:
Originally Posted by Evil_Maniac From Mars
That's possible, as this computer is really quite cool most of the time, due mainly to the location of it. It's possible it is the heatsink, but I don't know if the sound was coming from there. It's gone now, but I'll check if it comes back.
Here's system temperatures:
System: 28C
CPU: 37C
GPU: 51C
Sounds more like the PSU.
It could be a loose connection between anything that is spinning and its housing / cradle to the case.
I thought it was the PSU at first too, but the sound was coming from the region of the hard drive, at completely the opposite end of the case.
If it's the hard drive it will, in my experience, fail fairly soon. Noisy drives are nearly dead drives. YMMV. Keep good back-ups and have a look at your warranty; every so often a HD rolls off the line with so small a fault that nobody notices until it fails at the end user. You might've just gotten unlucky, but your warranty should cover it.
If you suspect it might just be vibration in the case try switching drive bays, or tightening up screws.
My first suspect would've been the fans too, but usually if you open up the case and it's a fan you can tell immediately where the noise is coming from. It's a good thing when a fan fails in a noisy fashion, it's only dangerous when they go completely quiet and you're not watching the temp. :laugh4:
:egypt:
It's running normally now, and has been for a few hours, so I hope it'll be OK. I don't have another place I can back up my data to right now, so it'll have to last. The only good thing is that it's a new computer, and the only files I lose I'll probably be able to replicate within a few days of failure.
Since it's normal now though, and is staying that way, it looks like I'm in luck.
Evil_Maniac_From_Mars:
Just caught up. I concur with the others, beware, any wierd noise coming from your HDD is always always always always bad news!
1. Make SURE you've backed up your important data. Documents, saves, bookmarks, email, etc etc etc... Back it all up and verify your backup.
2. See if Caravel's suggestion is a spot on, it "could" just be loose connections causing vibration. If you can verify 100% that it's the case, you should be ok, but just keep an eye on things. If you are NOT able to determine it's loose screws, then consider yourself on borrowed time. Even if it stops rattling, doesn't mean that it's "ok" now. My experience with those tools from different manufacturers is that they're all bunk and do not give any real indication of your drive's health whatsoever, though almost always the SMART settings will go south very soon before mechanical failure. As others have said, YMMV.
Best of luck!
:balloon2:
I need it to hold out until I can get an external HDD. I'll probably end up getting it checked out tomorrow, to make sure it's OK.
My C drive backup wizard requires me to insert a floppy to make a floppy disk. I don't have a floppy drive. How can I make the disc?
I've seen this before. Your rig is full of bees.
Move away from the machine and run, run for all you're worth!
:inquisitive:
By the way, my hard drive just stood up to multiple stress tests, including one from nVidia. If anything's wrong with it, it's physical.
I am actually thinking at this moment that it may be the fan in front of the drive, which would explain the noise. I'll have to test that out.
.
I'm not sure but can Daemon Tools or something of the sort fake a directory as a floppy drive? :embarassed:
.
This means I've backed up my entire drive - but I haven't got any way to boot it in the event of a failure. :dizzy2:
.
Try Nero. It has a very neat full drive backup feature, which builds your backup on a botable DVD/CD.
I'm running on my same years old setup for three hard drives and two mobos. :dizzy2:
.
It just so happens that I have Nero. I'm using the backup tool now. It's a beautiful program. ~:)
Thanks. :)
.
Glad it works. :bow:
.
You don't have a USB floppy drive? Very useful little buggers, cost about $15-$20.
Here's an example online, but you'd have to pay shipping:
http://www.buyextras.com/ioteoemusbe...FQk_gQodf0pfqQ
:egypt:
I have real problems now, which are probably HD related, but I haven't checked fully. Here's the story:
1) I boot up my computer. The buzzing noise is a little louder than usual.
2) The Windows boot screen appears (when it asks to select if you want your computer booted in safe mode or not)
3) Windows recognizes my HD and Disk Drive (not sure if it's related)
4) Windows loads, but just before the username/password screen is supposed to come up, it black screens, with a little mouse, and doesn't load.
5) I was forced to stop my data backup after some problems.
I'm taking it in to get looked at, but I can't until Tuesday. Is the problem for sure the HD, and what can I do?
EDIT: Oh great. Oh ****ing great. I can't even start based on last known configuration now. Why?
It makes me think my HD is corrupting my data.
"Windows could not start because the following file is missing or corrupt: WINDOWS\SYSTEM32\CONFIG\SYSTEM"
Failure imminent. Seriously.Quote:
Originally Posted by Evil_Maniac From Mars
This is NOT good at all, usually means the hardware is starting to physically fail.Quote:
2) The Windows boot screen appears (when it asks to select if you want your computer booted in safe mode or not)
3) Windows recognizes my HD and Disk Drive (not sure if it's related)
Do whatever you can to finish backing up your most critical stuff, NOW. No exceptions. You may already be too late, but keep trying.Quote:
4) Windows loads, but just before the username/password screen is supposed to come up, it black screens, with a little mouse, and doesn't load.
5) I was forced to stop my data backup after some problems.
I'm taking it in to get looked at, but I can't until Tuesday. Is the problem for sure the HD, and what can I do?
Hence my statements earlier, I think you're well into the downward spiral. Most likely your data is becoming corrupted and the drive is not too far away from mechanical failure. Keep trying to back your stuff up, verify your backups. After that's done, you need to RMA your HDD or go buy a new one ASAP, do NOT continue to use the machine for important things.Quote:
EDIT: Oh great. Oh ****ing great. I can't even start based on last known configuration now. Why?
It makes me think my HD is corrupting my data.
"Windows could not start because the following file is missing or corrupt: WINDOWS\SYSTEM32\CONFIG\SYSTEM"
The HD is physically going to Seagate, who have a data recovery service from busted or corrupt hard drives, and will send me back my data in addition to a new hard drive as part of my warranty. That's where it's going come Monday.
Well, you never really know something until you experience it (As some of us have). Noisy drives are almost always about to die! Most likely you just got unlucky with a drive that came off the line with a fault. I hope you didn't lose any critical data. Seagate is a reliable company who will honor their warranty, so you should be back up and running fairly soon.
:egypt:
They're going to be recovering my data from the drive, and I'm not too concerned about anything except the Windows install itself - everything else should be fairly easy to recover, as the most expansive sets of data are on my external or discs (music collection, for example).
I'm confident that I'll be up and running in about a week and a half, after my data is recovered and I get a new drive. This is being typed from my old computer. ~:)
Thanks to everyone for doing your best to help, much appreciated, and it probably saved me quite a bit of work in the long run. I'll mention it when I have everything up again. ~:)