Results 1 to 26 of 26

Thread: Artillery ignore "fire at will" being off

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Badger Member foop's Avatar
    Join Date
    May 2004
    Location
    London, England
    Posts
    85

    Default Artillery ignore "fire at will" being off

    Is this a bug, or just me being stupid? On a number of occasions I've turned "fire at will" off on a set of 12lb foot artillery, only to have them fire. This usually ends up being friendly fire, as I only turn FAW off if I'm charging infantry in front of them.

    I've tried clicking "stop" and turning FAW off. Same thing. I've wondered if they just continue to fire the charge they've just loaded, even though FAW is off. Maybe, but sometimes they just keep firing regardless.

    I couldn't see anything about this in the bugs thread, so apologies if I've missed it being reported already.

  2. #2
    Slixpoitation Member A Very Super Market's Avatar
    Join Date
    Jan 2009
    Location
    Vancouver, BC, Canada, North America, Terra, Sol, Milky Way, Local Cluster, Universe
    Posts
    3,700

    Default Re: Artillery ignore "fire at will" being off

    Arty is a bit stupid in general. Try turning FAW off, then pressing backspace, then setting them to melee only then backspace again. Or just limber them
    Spoiler Alert, click show to read: 
    WELCOME TO AVSM
    Cool store, bro! I want some ham.
    No ham, pepsi.
    They make deli slices of frozen pepsi now? Awesome!
    You also need to purchase a small freezer for storage of your pepsi.
    It runs on batteries. You'll need a few.
    Uhh, I guess I won't have pepsi then. Do you have change for a twenty?
    You can sift through the penny jar
    ALL WILL BE CONTINUED

    - Proud Horseman of the Presence

  3. #3

    Default Re: Artillery ignore "fire at will" being off

    If you've targeted a unit then turn off fire at will they will fire at that unit

  4. #4

    Default Re: Artillery ignore "fire at will" being off

    I just turn off fire at will then press backspace and that stops them.

  5. #5
    Villiage Idiot Member antisocialmunky's Avatar
    Join Date
    Feb 2005
    Location
    ゞ( ゚Д゚)ゞ
    Posts
    5,974

    Default Re: Artillery ignore "fire at will" being off

    If that doesn't fix it, tell them withdraw, off fire at will, and cancel the withdraw. This usually fixes even problems like batteries not packing up.
    Fighting isn't about winning, it's about depriving your enemy of all options except to lose.



    "Hi, Billy Mays Here!" 1958-2009

  6. #6
    Member Member Sol Invictus's Avatar
    Join Date
    Nov 2002
    Location
    Kentucky
    Posts
    229

    Default Re: Artillery ignore "fire at will" being off

    Artillery certainly needs alot of hand holding. A very slippery business.
    "The fruit of too much liberty is slavery", Cicero

  7. #7
    Member Member Lord of the Isles's Avatar
    Join Date
    Sep 2002
    Location
    Edinburgh, Scotland
    Posts
    286

    Default Re: Artillery ignore "fire at will" being off

    @foop original post in this thread: I've got a list of 4 artillery problems around the bottom of page 4 of the stickied bug thread.

    I've had an even better one recently, or perhaps a combination of two. I have 3 units of howitzers at a bridge battle. I fire a few rounds in their initial position, then move them. They unlimber fine and fire a few rounds. I try to limber them again and they do the (for me) fairly common "limber unlimber limbo", a funny dance but one I'm getting a bit fed up with. They limber up, and once the horses are in front and just about ready to go, they immediately unlimber again, and repeat that every time I give another limber button click.

    Fair enough, I'm used to it by now, so I realize I'll just have to do without them for the rest of the battle. Except they combine this with the bug the OP mentioned, still firing despite Fire at Will being off. And both the buttons Fire at Will and Stop Current Order are greyed out, and clicking them doesn't highlight them. The only button highlighted is the Limber/Unlimber one and that is the only button that has any effect for the rest of the battle.

    So for the rest of the battle I had to visit the artillery every 30 seconds or so, hitting Limber, and try to remember to go back to rehit it before they finished their Unlimber and start firing again. I couldn't seem to direct their fire - they seemed to chose their own targets - usually one next to some friendly units. It was so silly, I laughed more than I cried.

    Perhaps this is just how artillery behaved in the 18th century. Napoleon would give them an order to move but as soon as his back was turned, the French gunners would quickly unlimber and begin firing at some enemies, even when their shells were killing more of the Old Guard than the enemy. The scamps: I bet their general would cancel their supper before they had a good laugh together before bedtime. Sigh.

  8. #8
    Guest Dayve's Avatar
    Join Date
    Oct 2005
    Location
    England
    Posts
    1,659

    Default Re: Artillery ignore "fire at will" being off

    I almost cried yesterday when i turned fire at will off on my howitzers and all 12 cannons fired explosive shells at a Spanish unit of armed citizenry that was engaged with a unit of my grenadiers with 2 chevrons of experience and decimated both units...

    I just limber them up when melee starts, and even then some of them ignore the limber up orders.

  9. #9

    Default Re: Artillery ignore "fire at will" being off

    Yeah, ignoring fire at will is one thing, but unlimbering without being told is another.
    Yesterday I lost 4 units of horse artillery, because they refused to limber up. Rather, they would unlimber immediately after limbering up. Idiots. Couldn/t they see they were all alone on that little hill and there were like 5 regiments of nasty indians with even nastier axes walking their way?
    I mean come on!
    If you wanna be suicidal, drink yourself to death, don't waste my cannons!!!

  10. #10

    Default Re: Artillery ignore "fire at will" being off

    I have seen it but the opposite too, fire at will on and them not firing at all, just loading their guns standing there...

  11. #11
    Praeparet bellum Member Quillan's Avatar
    Join Date
    Sep 2004
    Posts
    1,109

    Default Re: Artillery ignore "fire at will" being off

    I have also had the limber-unlimber-limber dance going on. That one I go around by just clicking on a bare patch of ground about the time the limbers got in front of the arty pieces; even though it was still the target icon they started moving to that point instead of shooting at it. Once I got them moving, they unlimbered and acted fine for the remainder of the battle.
    Age and treachery will defeat youth and skill every time.

  12. #12
    Village special needs person Member Kobal2fr's Avatar
    Join Date
    Nov 2006
    Location
    Paris, France
    Posts
    914

    Default Re: Artillery ignore "fire at will" being off

    Quote Originally Posted by nederlander View Post
    I have seen it but the opposite too, fire at will on and them not firing at all, just loading their guns standing there...
    It's possible you manually gave them a target they can't see/fire at. I noticed that sometimes my fixed arty would just stand there like idiots during a city battle after I ordered them to blast a building to smithereens (don't you love infantry garrisoning buildings ? It's like a yummy arty piñata !). Turns out, there was no direct line of fire. I had to blow up a few other buildings that were in the way, then they were able to shell the intended target.

    The LOS is sort of picky, too. It seems to be calculated from the center of the formation, so sometimes one piece will have a clear LOS but won't fire because the target is masked from one or two cannon. And this is one more reason fixed arty sucks :)
    Anything wrong ? Blame it on me. I'm the French.

  13. #13
    kwait nait Member Monsieur Alphonse's Avatar
    Join Date
    May 2007
    Location
    Groningen
    Posts
    928

    Default Re: Artillery ignore "fire at will" being off

    I think that the limber / unlimber thing is serious bugged. I had two units of 12lb foot artillery with me to destroy the pirates when one got stuck in some kind of loop. One of its four cannons was already unlimbered while the other three weren't. Whatever I did, I was not able to get them working again. And then the other started to get a mind of its own. Whenever I told it to move, the damn crew would start parking the horses in front of the pieces, just to unlimber again and start shooting again. In the end I quit the battle, reloaded and auto resolved. I hope CA will fix this because other wise the game will become some kind of CIV 5.
    Tosa Inu

  14. #14
    Member Member Lord of the Isles's Avatar
    Join Date
    Sep 2002
    Location
    Edinburgh, Scotland
    Posts
    286

    Default Re: Artillery ignore "fire at will" being off

    Quote Originally Posted by Kobal2fr View Post
    It's possible you manually gave them a target they can't see/fire at. I noticed that sometimes my fixed arty would just stand there like idiots during a city battle after I ordered them to blast a building to smithereens (don't you love infantry garrisoning buildings ? It's like a yummy arty piñata !). Turns out, there was no direct line of fire. I had to blow up a few other buildings that were in the way, then they were able to shell the intended target.

    The LOS is sort of picky, too. It seems to be calculated from the center of the formation, so sometimes one piece will have a clear LOS but won't fire because the target is masked from one or two cannon. And this is one more reason fixed arty sucks :)

    I've seen this too and I think you have the right explanation. But I don't mind it - it does seem somewhat realistic that LOS issues could lead to an artillery piece not firing. In fact, I've got into the habit of zooming the camera down to ground level to identify both LOS to potential targets and also to check the terrain, since I suspect that it affects LOS as well (a raised bump just ahead of the firing position is particularly bad). M2TW had these issues too with seige pieces and cannons sometimes not able to fire. But like I said, I don't mind this behaviour, though I guess it is frustrating until you work out what is causing it. Some way of showing the problem in the unit card or report when you mouse over the unit would be nice.

  15. #15
    A Livonian Rebel Member Slaists's Avatar
    Join Date
    Sep 2004
    Posts
    1,828

    Default Re: Artillery ignore "fire at will" being off

    Quote Originally Posted by foop View Post
    Is this a bug, or just me being stupid? On a number of occasions I've turned "fire at will" off on a set of 12lb foot artillery, only to have them fire. This usually ends up being friendly fire, as I only turn FAW off if I'm charging infantry in front of them.

    I've tried clicking "stop" and turning FAW off. Same thing. I've wondered if they just continue to fire the charge they've just loaded, even though FAW is off. Maybe, but sometimes they just keep firing regardless.

    I couldn't see anything about this in the bugs thread, so apologies if I've missed it being reported already.
    I have noticed that if you turn fire at will off and backspace to cancel orders, the artillery will not fire (at least the animation does not fire); however, the arty going off sound will still be playing now and then. I guess, it's an audio glitch.

  16. #16
    Member Member Den of Earth's Avatar
    Join Date
    Mar 2009
    Location
    IDAHO
    Posts
    14

    Default Re: Artillery ignore "fire at will" being off

    I served 3 1/2 years as a maintenace tech in a field artillery unit and we use to call them "GUNDOGS"! Similar to the term "DAT'S"(DUM-ASS TANKERS").

  17. #17

    Default Re: Artillery ignore "fire at will" being off

    You have to remember that standing next to firing guns all the time, they're likely deaf as posts and unable to hear your orders.



  18. #18
    Member Member Didz's Avatar
    Join Date
    Oct 2000
    Location
    Bedfordshire UK
    Posts
    2,368

    Default Re: Artillery ignore "fire at will" being off

    Quote Originally Posted by foop View Post
    Is this a bug, or just me being stupid? On a number of occasions I've turned "fire at will" off on a set of 12lb foot artillery, only to have them fire. This usually ends up being friendly fire, as I only turn FAW off if I'm charging infantry in front of them.

    I've tried clicking "stop" and turning FAW off. Same thing. I've wondered if they just continue to fire the charge they've just loaded, even though FAW is off. Maybe, but sometimes they just keep firing regardless.

    I couldn't see anything about this in the bugs thread, so apologies if I've missed it being reported already.
    I realised pretty early on that artillery is so 'bug' ridden in ETW that its just not worth using.

    On top of the problem you have highlighted there is the 'Fire At Will' bug which no longer takes any notice of friendly troops, and the unlimber bug, that causes artillery to spontaneously unlimber without orders and bombard the location to just ordered it to move to.

    I vowed after the first couple of battles never to use artillery in my armies, and I've stuck to that rule with the exception of howitzers, which because they fire on a high trajectory at least manage to limit the damage they do to your own army.

    It just a shame they changed the way artillery worked in ETW as it was quite fun to use in MTW2.
    Last edited by Didz; 04-03-2009 at 11:58.
    Didz
    Fortis balore et armis

  19. #19
    ex Lord Member Melvish's Avatar
    Join Date
    Mar 2009
    Location
    In a chair
    Posts
    108

    Default Re: Artillery ignore "fire at will" being off

    Turning of fire at will then press the stop button THEN limber work most of the time. I had some exceptions although like when the cannon crew re-unlimbered and proceeded at shooting my general with cannister shells. . Even with the risk of silly bugs i consider cannon to valuable to be excluded from my army. In their current state i only include one 12/24 lbs foot for building/wall demolition and defensive support. One 6lbs horse cannon that i use with cavalries/dragoons; very useful for quick redeployment on the flank for canister shot action. Tree howitzers because they need less micromanagement.
    Last edited by Melvish; 04-03-2009 at 14:54.
    I destroy my enemies when I make them my friends. ---Abraham Lincoln

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO