WTW and Vista

PC Mode

Kamakazi 00:57 02-24-2011

i cant get my mtw to work with vista can i get some help plz?

drone 04:39 02-24-2011

It does work on Vista, so what you are asking is not impossible. So to start with, what is the problem you are seeing (CTD at some point, no control, bad rez, etc.)? And what are your hardware specs: video card, RAM, dxdiag results?

edyzmedieval 17:23 02-24-2011

If you have Vista 64-bit and a middle/high end nVIDIA video card, run in Compatibility for XP/ME and maximum battlemap resolution set at 1152x864.

Should work without many problems.

Kamakazi 13:52 02-28-2011

it works perfectly fine until i try to load the map the it just collapses like ill get all full on the load bar then it goes black screen and bye bye

drone 14:28 02-28-2011

What video card are you using?

Kamakazi 17:07 03-01-2011

Display adapter type NVIDIA GeForce 8400M GS
Total available graphics memory 2047 MB
Dedicated graphics memory 256 MB
Dedicated system memory 0 MB
Shared system memory 1791 MB
Display adapter driver version 8.16.11.8766
Primary monitor resolution 1280x800
DirectX version DirectX 10

edyzmedieval 17:19 03-01-2011

Originally Posted by Kamakazi:
Display adapter type NVIDIA GeForce 8400M GS
Total available graphics memory 2047 MB
Dedicated graphics memory 256 MB
Dedicated system memory 0 MB
Shared system memory 1791 MB
Display adapter driver version 8.16.11.8766
Primary monitor resolution 1280x800
DirectX version DirectX 10

What's the game details you're using? Battle resolution, unit size, campaign map resolution, particle effects, hardware or software acceleration?

Kamakazi 17:48 03-01-2011

everything is set at game defaults

drone 19:48 03-01-2011

If you are running Vista 64-bit, I think you need to run MTW under compatibility mode. I believe Win2000 works best. You should definitely apply the button fix, your graphics card is going to give you trouble.

Kamakazi 21:24 03-01-2011

that button fix link does nothing but confuse me

drone 23:28 03-01-2011

peter_de123 found that replacing the two .bif files that represented the previous and next buttons on the campaign map fixed the campaign map CTD when using nVidia 8/9XXX series cards. He used the previous and next buttons from the Napoleon MTW mod, I'm guessing the mod version of the buttons get rendered differently and don't crash the game. The link in that post points you to a zip file with the 2 buttons from the mod, all you need to do is download it, unzip, and place the .bif files in the "Medieval - Total War\campmap\buttons" directory. You should probably back up the originals, button_ipnext.bif and button_ipprev.bif (change their names by appending ".orig" to them) prior to overwriting them.

Biowulf 02:28 03-02-2011

I know this is somewhat off topic and I can't find a clear answer to this using the search function, but does MTW work with Win 7? Or will I need to do some tweaking? I was thinking of buying the Gold edition but I don't want to waste my money if it won't work.

drone 02:41 03-02-2011

MTW does work on Win 7, depending on the hardware configuration of course, and there may need to be a little tweaking. What OS version (32-bit/64-bit), how much RAM, and what video card do you have?

Biowulf 02:44 03-02-2011

64-bit, 4GB RAM, and (I think) an AMD M880G w/ ATI Mobility Radeon HD 4200

drone 03:18 03-02-2011

Should work, you will probably need to run in Win XP/2000 compatibility mode, but I think your video card should run it fine. I'm on Vista with a Mobility 4850, I can run it with no problems. There is a resolution option issue with Win 7, but there is a workaround.

Biowulf 16:44 03-02-2011

Thanks! I'll be ordering it soon.

Kamakazi 15:56 03-05-2011

ok i got my map working now when i try to do battles the game lags i cant select my units and i cant move them at all.... any fixes here?

Stazi 22:37 03-05-2011

Geforce series 8XXX nad 9XXX don't allow to command units in battle (mouse doesn't work properly with screen). I haven't seen any fix for this. There is a little workaround but very limited and uncomfortable. You can command units via minimap so maximize the minimap and try (forget about any sophisticated maneuvers).

Motep 23:13 03-31-2011

I am running vista with an ATI 1250, and I have no idea how to get it to work. Ive done the button fix, and I am running it in compatibility mode, but these little things are doing nothing.

drone 23:28 03-31-2011

What troubles are you seeing? Is it crashing upon entering the campaign, or somewhere else?

Motep 01:06 04-01-2011

It crashes upon entering the campaign, yes. The battles are working just fine.

drone 05:05 04-01-2011

The 1250 is the integrated graphics Xpress line, right? At first I thought that you shouldn't have this problem with an ATI card, but if you have an IGP that might be the problem. Have you tried different screen resolutions for the campaign map?

Motep 05:53 04-01-2011

as in x1250? yeah.

And I have tried various sizes, yes.

caravel 08:46 04-01-2011

The X12xx series IGPs are the AMD RS690 chips. They are not true X1xxx series chips and are actually closer to the X700 chips.

I have gotten the game running on an X1200 on XP with no issues - the onboard graphics seem to make the whole system sluggish (right from boot up) though so they're not great. Try installing the original chipset drivers that came with the motherboard - though I've gotten the game running on the latest drivers as well.

To be honest though, I would have thought the button fix would have solved this. Are you absolutely sure you installed the files in the right place? I say this because several people have gotten this wrong in the past.

Motep 17:23 04-01-2011

They are in the right spot, yes

And I dont recall ever updating my drivers...

Single Sign On provided by vBSSO