Scutum and Pilum Question

[abou]

So I have been wondering recently about the Roman scutum and I figured that if anyone could answer these questions it would be those here.

The scutum is stated as having a horizontal handgrip, which apparently is made so that the shield can be carried at the side when marching. This makes sense and even though having the grip horizontal would put a lot of work on the forearm rather than the bicep the legionaries were in excellent shape; thus there isn't an issue of getting tired early in the fight. Now, what about the pilum? If the pila are supposed to be held in the shield hand, how were they held if the shield-grip is horizontal?

[Dayve]

Pilum are held ONTO the shield by clips aren't they?

[Philippus Flavius Homovallumus]

Firstly, a horizontal grip provides better stability when recieving blows and the shield is held out with the forarm at right angles to the ground so the strain does go on the bicep. There is no evidence to suggest that the pila were clipped onto the shield as far as I know.

The Pila were thrown and as such were held in the sword arm for the most part. I suspect the spare was driven into the ground while the first one was thrown. Once you entered melee I can't see any way to keep ahold of the pilum, it would get shatterd by the first downward cut the scutum recieved anyway.

[Elthore]

A horizontal strap definetly gives more strain to the bicepts, the action should be very similar to lifting some weights(in the typical sense). This also allows someone to easily tilt the shield down or up depending on the impact recieved.
Regarding the pilum: i dont see a reason why they cannot be held in the shield hand, perpindicular to the scutum, much like how peltasts would carry their javelins while carrying a theuros.

^^
some educated guessing, i could be wrong

actually, one reason why they might not have been able to do this (scutum + pila) is if the strap on the scutum was very tight. This coupled with the concave bend of the shield might not leave enough room for the pila to be gripped without bending it as well.

[abou]

The reason why I say there would be more strain on the forearm is because I would imagine the shield would be held with the palm facing down rather than up. When you lift weights and grasp the bar from above with palms down that works the forearms, which is different from what is normally done with the palm up. Now, if a pilum were held in the shield-hand that would leave it along the horizontal axis and, as Elthore stated, difficult because of the curve of the scutum - if possible at all. Hence, my confusion to this.

I've looked around on reenacting websites, but haven't found much to answer my question.

Pilum are held ONTO the shield by clips aren't they?

Nothing I have read has made mention of clips except in the case of plumbatae. Personally, I don't think clips could hold the heavy pilum in place.

[Philippus Flavius Homovallumus]

The shield is held with the knuckles facing outwards and it definately strains the biceps.

Theory: The curve of the Scutum might allow you to grip one Pilum at an angle and the curve would stop it falling out of your arm.

[Oldgamer]

No one should consider this as evidence, one way or the other. However, for whatever it's worth ...

I've been involved in Roman re-enactment units, in the past. The scutum is carred with the palm facing up, because the thing weighs about 27 pounds. A palm-facing down carry would put tremendous strain on the hand and lower arm. Besides which, when a "barbarian" crashes a 12-pound longsword onto your shield, it's coming out of your hand, if the palm is down.

Because of the unique shape of the pilum, "clips" really aren't needed. Once the pilum is slipped between scutum and strap, it comes to a stop at a logical point. Gravity does the rest, as Ironwall correctly theorised. I also wish to point out that the scutum and two pila is a large load for the one hand and arm, especially over a long march.

[Philippus Flavius Homovallumus]

Uh 27 pounds? I would have said an Imperial Scutum was half that tops, are you sure. As to the longsword thing, aren't you going to break your elbow with that sword crashing into your shield and how are you going to manuver it or do the "face punch" with the boss?

I'm going to get hold of John and ask him about this.

Never mind, from the Ermine Stree Guard Website:

The writer's personal experience of using Legionary shields has shown that although it may, due to its curved shape, appear difficult to carry and use, this is not the case and in fact once one is experienced in its use the benefits of this type of shield for a unit operating in formation become evident. To carry the shield an overhand grip is used and the shield is held vertically at arm's length, as if one was carrying a shopping bag. Although this type of grip may appear awkward it is better than a underhand grip where the weight of the shield is continually trying to straighten the arm against the joint's natural articulation.

Using a overhand grip also has the benefit of making the shield more manoeuvrable, meaning that you can hold the shield away from the body; close in to the body; at arms length at shoulder height; above the head; in front of the body or braced against the shoulder with the top edge of the shield at eye level. Because of its curvature the shield wraps around the user providing a large degree of protection which increases when the carrier is part of a formation. Although as said, the shield is easy to carry and manoeuvre, after prolonged periods of carrying it, the arm begins to feel the weight, despite its lightweight construction.

http://www.esg.ndirect.co.uk/legionary%20equipment.htm

These guys have over 30 years of experience.

[Oldgamer]

Uh 27 pounds? I would have said an Imperial Scutum was half that tops, are you sure. As to the longsword thing, aren't you going to break your elbow with that sword crashing into your shield and how are you going to manuver it or do the "face punch" with the boss?

I'm going to get hold of John and ask him about this.

Never mind, from the Ermine Stree Guard Website:

http://www.esg.ndirect.co.uk/legionary%20equipment.htm

These guys have over 30 years of experience.

With 30 years of experience, it's a good thing they never had to go into actual combat, with the overhand grip. Based upon historical accounts and dimensions, the scutum that I used ... like the actual Roman shield ... was made of two layers of plywood, covered with thick leather, all bound by a iron strap around the edges. Mine tipped the scales at slightly over 27 pounds.

It was essential to throw your two pila before engaged in melee, because the added weight on the shield made it unwieldy, to say the least. You try holding a scutum like a shopping bag, and see if you can maintain your grip on it, when the "12-pound longsword" I mentioned comes crashing down from above.

As for the face punch, it was more of a body punch, designed to use the considerable strength of the legionary, combined with the weight of the shield, to knock the enemy backwards into the men behind him. As he bounces off of them, he receives the gladius in center-of-mass. Note that a legionary could penetrate the same or more armor than a modern .30-06 hunting rifle at 100 yards. The purpose of the what I would call the "body punch" is to set the enemy up for a thrust.

I am a member of SAFD, but like I said in the first post here, you shouldn't consider this as "evidence", especially if you're moving in a different direction with the animations.

One final thing, take something that weighs about 13.5 pounds (you mentioned half the weight that I'm talking about), and see how long you can maintain a shopping bag carry.

[Philippus Flavius Homovallumus]

With 30 years of experience, it's a good thing they never had to go into actual combat, with the overhand grip. Based upon historical accounts and dimensions, the scutum that I used ... like the actual Roman shield ... was made of two layers of plywood, covered with thick leather, all bound by a iron strap around the edges. Mine tipped the scales at slightly over 27 pounds.

It was essential to throw your two pila before engaged in melee, because the added weight on the shield made it unwieldy, to say the least. You try holding a scutum like a shopping bag, and see if you can maintain your grip on it, when the "12-pound longsword" I mentioned comes crashing down from above.

As for the face punch, it was more of a body punch, designed to use the considerable strength of the legionary, combined with the weight of the shield, to knock the enemy backwards into the men behind him. As he bounces off of them, he receives the gladius in center-of-mass. Note that a legionary could penetrate the same or more armor than a modern .30-06 hunting rifle at 100 yards. The purpose of the what I would call the "body punch" is to set the enemy up for a thrust.

I am a member of SAFD, but like I said in the first post here, you shouldn't consider this as "evidence", especially if you're moving in a different direction with the animations.

One final thing, take something that weighs about 13.5 pounds (you mentioned half the weight that I'm talking about), and see how long you can maintain a shopping bag carry.

Ok, I'm going to stop you at "12 pound longsword." Assuming you mean a single handed weapon you can cut that down to a quarter. As I said the Ermine Street Guard are one of the world leaders in Roman re-enactment. I suggest you actually read the link I posted in full as he goes through the construction of each piece of equipment, both historically and in modern terms.

You still haven't addressed the lack of manuverability with the palm up grip or the strain it places on the elbow. Regardless the shield shouls never jump out of you hand because your forarm will be braced against it.

[Oldgamer]

Ok, I'm going to stop you at "12 pound longsword." Assuming you mean a single handed weapon you can cut that down to a quarter. As I said the Ermine Street Guard are one of the world leaders in Roman re-enactment. I suggest you actually read the link I posted in full as he goes through the construction of each piece of equipment, both historically and in modern terms.

You still haven't addressed the lack of manuverability with the palm up grip or the strain it places on the elbow. Regardless the shield shouls never jump out of you hand because your forarm will be braced against it.

Sorry for the long delay in answering you. BTW, I love your screen name!

A three-pound sword sounds more like a ceremonial or theatrical weapon. The swords used by northern European barbarians were long and quite heavy. Their purpose was to shatter shields, crush helms, and break bones under body armor. They had a secondary ability to thrust, but this was not their primary purpose. For these purposes, they needed strong, highly-conditioned men.

I did read the link you provided, and found it very interesting. I don't deny any of the claims made there. Indeed, my purpose in this thread is not to start an argument or a debate of any kind, but to raise a question based upon my personal experience as a re-enactor, and as a trainer in theatrical productions.

Like I said earlier, none of what I have to say in this thread should be taken as "evidence", and it certainly should have no effect whatever on the animations used in the mod.

[Philippus Flavius Homovallumus]

Sorry for the long delay in answering you. BTW, I love your screen name!

A three-pound sword sounds more like a ceremonial or theatrical weapon. The swords used by northern European barbarians were long and quite heavy. Their purpose was to shatter shields, crush helms, and break bones under body armor. They had a secondary ability to thrust, but this was not their primary purpose. For these purposes, they needed strong, highly-conditioned men.

Thanks, the name comes from one of the Saxon heros in VI.

As far as swords go I'm afraid you are sadly mistaken. No sword has ever been used to crush helms, it simply isn't possible, I've seen men try and barbarian swords were cutting weapons not crushing weapons. They rarely exceeded 3.5 pounds in weight and were really quite wieldly. All swords in Europe have a common ancestor in the Naue II, the cut-and-thrust weapon developed in the late bronze and then used From Greece to Egypt to Denmark.

I'm sorry but you're simply wrong, think about it objectively, no "barbarian" was significantly larger than a modern European, they weren't larger than Germans or Danes, a 12 pound weapon would be unuseable in a battl lasting several hours.

Just incase that doesn't convince you a Roman Gladius would mass around 1.2-1.6 Kg, or about 3 pounds, with a blade around 24" long and 2.5" wide its a fairly heavy weapon, by comparison a Barbarian sword would usually have blade around 28-32" tops and would probably taper towards the point.

Work it out, the barbarian sword would only be 4 pounds, tops. Probably less because a Roman sword has parralel sides or a leaf-blade.

[Musopticon?]

Those swords are suprisingly light actually.

I guess it's the Hollywood-brainwashing at work, when you imagine barbarians doing Conan-like overhand swings, straining under the weight of the swords and yelling bloody murder.

[Reverend Joe]

As far as swords go I'm afraid you are sadly mistaken. No sword has ever been used to crush helms, it simply isn't possible

One point here: just because you may argue that the "barbarian" swords were not meant to crush helms doesn't mean that no swords ever were designed to meet this end.



The Falcata was not an unusually large sword, nor was it unusually heavy (although it certainly wasn't light); but it was specially designed ao that all of the weight would be brought down on one point, in a single downward slash. A sword like this would almost certainly be specialized to slice through armor like butter, and yes- smashing helmets (not to mention shields) was probably part of the goal.

[Reverend Joe]

Repeat post.

[Reverend Joe]

Repeat post.

[Reverend Joe]

Another repeat post...

How the hell did I do that?!

[O'ETAIPOS]

On the weight of swords - few examples I know from early medieval (achaeological finds) weighted about 1 kg - without hand coverage(missing).
Some of celtic longswords were wider but still it won't give much more than 2-3 kg

[Philippus Flavius Homovallumus]

Thanks for the backup O'ETAIPOS, I know a couple of articles on Medieval sword weights mut obviously Roman era weapons were mostly carbonised iron rather than true steel and a bit heavier.

Zorba: Yes, but the Falcetta and the Falx are really glorified can openers and they cut rather than crush. Infact because it was so durable the Gladius was relatively effective against armour, certainly more so than a "barbarian" longsword.

Musopticon?: You are correct, swords were never that heavy, battleaxes were never that heavy. Lord of the Rings, Gladiator and BRaveheart have good sword combat. Look how fast Gibson moves with that claymore.

[stalin]

The average claymore ran about 55 inches (1.4 m) in overall length, with a 13 inch (33 cm) grip, 42 inch (1 m) blade and weighed approximately 5.5 lb (2.5 kg). And that's about as big as any sword gets gentlemen

[Oldgamer]

I will make one more post, in this thread, unless I am invited back. I rather feel like I'm in the "Mudpit" at the TWC, and there's people who feel obligated to shoot me down at every juncture.

First, I am not an 18-year old, who has just watched The Adventures of Robin Hood for the first time, and thinks that Medieval broadswords are used like fencing foils.

I am a 58-year old veteran of the military, and paramilitary/intel work, and am in the best of health. I can bench-press over 400 pounds, run a 440-meter in 1 minute, 48 seconds, and the 100-yard dash in 10.8 seconds. My conditioning is roughly equivalent to that of a 20-year legionary or a northern "barbarian" who has trained for war, all of his life.

Second, I am a member of the Society of American Fight Directors (SAFD), and hold the rank of "Fight Master" in that society. Description follows:

These individuals have been awarded this status (inclusion in the College of Fight Masters) for having demonstrated the highest level of professional experience as teachers and directors of physical violence in the entertainment industry. The Society sanctions these individuals to adjudicate Skills Proficiency Tests, to serve as Master Teachers at any SAFD sanctioned workshop and to serve in the College of Fight Masters, an Advisory Board to the Governing Body of the Society.

Third, I am not entirely unfamiliar with the academic background of what we are talking about here. For example, the Chicago Historical Society has one of the largest collections and ancient and Medieval weapons and armor in the United States. After demonstrating some of the techniques used in combat during the Middle Ages, I was privileged to handle some of the exhibit's prize specimens, which includes a leaf-shaped Celtic sword dating from the 2-3rd Century, BC. Although the handle is missing, the weapon ... made of iron ... weighs 10-11 pounds, if it weighs an ounce. And note that the weapon is not made for stabbing, like the gladius. Its purpose is to wave on high and bring down on an opponent with maximum force (and for this purpose, it is weighted so that the weapon's force would occur within 5 inches of the tip).

You are aware that the metallurgist's trade has changed a great deal, since the 2cd Century BC, correct? Today, you would be completely right about a Gallic longsword weighing about 3-3.5 pounds. Indeed, the Zweihander is of inferior quality, if it weighs more than 4 pounds, and that sword is a massive weapon. But in the 2cd Century, BC?

Concerning actual combat ...

You can call it "crush", or whatever you wish. I'm not interested in semantics, here. But if you and I were in combat, and I were using a weapon like this and brought it down on your helmet, you would be in a world of hurt, my friend. Indeed, your ONLY chance of survival is if the sword only struck a glancing blow. And even then, it is likely that the weapon would glance off the helmet and strike you in the shoulder, and, depending on your armor, either break your shoulder or make you "Ironwall, the One-Armed".

There are people in the world who know something about this subject besides yourself, sir. I will cede you your point about the carry on the scutum, because I have done some research since entering this, including the link you provided earlier. My own experience with re-enacting was a long time ago, and perhaps our research ... without an internet available, then ... was faulty.

[Philippus Flavius Homovallumus]

I will make one more post, in this thread, unless I am invited back. I rather feel like I'm in the "Mudpit" at the TWC, and there's people who feel obligated to shoot me down at every juncture.

I have not been trying to shoot you down. However, if I think you are wrong I will say so, here I am drawing on what I have read and been taught in the field of experimental archaeology.

I will concede the following points.

1.) A weapon from the 2nd century BC would definately weigh more than one from the 1st century BC/AD, the period from which I generally work. As you say many advances have been made and a lot of them were made after your particular sword was forged. I still think ten pounds is very heavy and it sounds like an odd weapon, how long was it?

[Edit: Some initial research suggests the weapon you descibe is a cavalry weapon, ealier infantry weapons being shorter and pointed.]

2.) I will also concede that an Imperial Scutum was, I discovered today, around 20 pounds, so we were both about as wrong as each other there.

You are correct that the shield was not overly mobile and I apolagise if I gave that impression, it is something of a controvosy between experience and the literature. I would say that it was manuverable and fairly easy to carry and use with practice.

As for the face punch, it was more of a body punch, designed to use the considerable strength of the legionary, combined with the weight of the shield, to knock the enemy backwards into the men behind him. As he bounces off of them, he receives the gladius in center-of-mass. Note that a legionary could penetrate the same or more armor than a modern .30-06 hunting rifle at 100 yards. The purpose of the what I would call the "body punch" is to set the enemy up for a thrust.

You are more-or-less right here actually and I hang my head in shame for mentioning the "face punch." You can't do it with the boss, you can however, do a nifty number with the brass rim. I was remembering one photograph of a big guy with a little scutum.



So it would seem we both made some mistakes.

Oh, "Wigferth the One Armed"

How about, "Wigferth wooden arm?"

[Oldgamer]

I have not been trying to shoot you down. However, if I think you are wrong I will say so, here I am drawing on what I have read and been taught in the field of experimental archaeology.

First, sorry about the tone of my previous post. I've been spending too much time in the TWC Mudpit!

I will concede the following points.

1.) A weapon from the 2nd century BC would definately weigh more than one from the 1st century BC/AD, the period from which I generally work. As you say many advances have been made and a lot of them were made after your particular sword was forged. I still think ten pounds is very heavy and it sounds like an odd weapon, how long was it?

[Edit: Some initial research suggests the weapon you descibe is a cavalry weapon, ealier infantry weapons being shorter and pointed.]

The weapons I held was about 42 inches long, from tip to end of tang. At its widest point ... and remember that it was a leaf-shaped weapon ... it was some 4-4.5 inches (down where the hilt would have been, it was about 2.5 inches). It was a large weapon, to say the least, and would have required a strong man to wield it. The archaeologist who showed it to me wasn't sure whether it was a cavalry weapon or not (I asked him), but reminded me that many people of Celtic, Gallic, and Teutonic origins used very long and heavy weapons designed to smash armor and break bones.

2.) I will also concede that an Imperial Scutum was, I discovered today, around 20 pounds, so we were both about as wrong as each other there.

You are correct that the shield was not overly mobile and I apolagise if I gave that impression, it is something of a controvosy between experience and the literature. I would say that it was manuverable and fairly easy to carry and use with practice.

You are more-or-less right here actually and I hang my head in shame for mentioning the "face punch." You can't do it with the boss, you can however, do a nifty number with the brass rim. I was remembering one photograph of a big guy with a little scutum.

Concerning the weight of the scutum, much would depend on the thickness of the plywood from which it was made. I've never been able to find any truly reliable source concerning this. We don't even know how thick the "plys" were, and from what type of wood they were made. It's very possible that the plywood we used in my re-enactment group was too thick.

I guess that it would be possible for a highly-conditioned warrior to do a face punch, if the opportunity presented itself. For the quality of all of our research, we don't really have a clear idea of what happened man vs. man in ancient warfare, except that men died.

So it would seem we both made some mistakes.

I make them all the time!

Oh, "Wigferth the One Armed"
How about, "Wigferth wooden arm?"

Sounds good to me. I like the aliteration!

Once again, sorry for the testy nature of my earlier post.

[Philippus Flavius Homovallumus]

Don't worry about it, I can sound a bit uppety some times. The important thing to remember is I don't do subtext and I don't pull puches. What you read is what I think.

Thats mostly a good thing.

The weapons I held was about 42 inches long, from tip to end of tang. At its widest point ... and remember that it was a leaf-shaped weapon ... it was some 4-4.5 inches (down where the hilt would have been, it was about 2.5 inches). It was a large weapon, to say the least, and would have required a strong man to wield it. The archaeologist who showed it to me wasn't sure whether it was a cavalry weapon or not (I asked him), but reminded me that many people of Celtic, Gallic, and Teutonic origins used very long and heavy weapons designed to smash armor and break bones.

I was reading an article earlier, I'd post it but its on a university network, Celtic swords got longer and lost their points, this is attributed, by the author, to the swirch from chariot "taxies" to full mounted warfare. It sounds a very improbable weapon for any foot soldier to use.

Concerning the weight of the scutum, much would depend on the thickness of the plywood from which it was made. I've never been able to find any truly reliable source concerning this. We don't even know how thick the "plys" were, and from what type of wood they were made. It's very possible that the plywood we used in my re-enactment group was too thick.

I'm afraid you're a little out of date here, several well preserved shields were found in the Middle East and dated to around the 1st century AD, IRRC. The method of construction seems to have been three layers with the grain alternating between horizontal and vetical. The examples were weighted between 10-11kg.

I guess that it would be possible for a highly-conditioned warrior to do a face punch, if the opportunity presented itself. For the quality of all of our research, we don't really have a clear idea of what happened man vs. man in ancient warfare, except that men died.

Its definately possible but I must admit that its more impressive to do infront of your mates than on the battlefield. I was talking to one of my friends today who knows more than either of us, he said you can "garage-door" with the shield and slam the edge into their face relatively easily, which also has the advatage of keeping them at arm's distance.

Right now I'm wondering how to break it to the team that Manchester university have decided that the Romans didn't have a red die that would take to horsehair.

[Quintus Valerius]

What about the red dye taking to feathers? I presume that it would be fine there?

[Philippus Flavius Homovallumus]

You have the wrong topic but I'll answer anyway.

Polybius explicitely tells us that the pre-Marian Legionaries had painted purple and black crests. It all repends on whether they had a good red dye, I would say they probably did.

[Watchman]

"12-pound swords" my arse. Maces never got that heavy (the one-handed kind tend to top at around 4 kg tops), and those things work purely by mass and leverage. Big "zweihander" greatswords made to chop anything short of solid steel plate armour to bits tend to top around 3 kg despite their size...

I don't care how big and burly the Celts were, they weren't going to go around swinging six-kilo swords. No need to either. A good overhand swing from a relatively heavy (ie. 2 kg tops) longsword is going to give you about as much power as you're ever going to sensibly get out of a one-hander (Renaissance combat manuals apparently call that sort of downward cut "cut of wrath"); both Celtic and Roman mail shirts had shoulder doublings pretty much specifically to resist this sort of impact. If you want more oomph, you don't go and buy a heavier sword (unless you're switching to a straight two-hander); that'll be too heavy and cumbersome to use effectively anyway. Instead you're going to get a sword with a different point of balance - think falchion - or something like an axe or mace of similar "mass" weapon. Those aren't markedly heavier either, they just have their mass concentrated at the end of the lever which although it makes them a tad clumsy in comparision also imparts some pretty nasty leverage.

The level of metallurgy has little to do with this. The maximum viable mass of a weapon isn't determined by its materials, but by the physical limitations of its wielder - and those say that in practice one-handed swords can't go too much above one kilo in weight if you intend to fight with them for any amount of time. Metallurgy determines the resiliency, durability, edge-keeping qualities and suchlike of the weapon, and when it comes to *that* both the Celts and Romans knew how to make high-quality pattern-welded steel blades - those just tended to be pretty expensive.

As for the scutum-pilum thing, I've gotten the impression the legionaires didn't necessarily carry more than one javelin to combat anyway - and presumably new ones could be procured from the baggage as needed, given that major battles could well take the better part of a day. Certainly if they did take two along there'd be a minor issue with just where they put the spare when they threw the first one - given that Roman tactics were AFAIK pretty keen on maintaining formation and drill it seems somewhat unlikely they'd have taken too much of a running start when throwing the pila, but I don't know much about this. Obviously if they threw more or less stationary the spare javelin could probably be stuck on the ground or held under the shield arm or somesuch - historical warriors were often quite creative when coming up with means of holding onto cumbersome weapons not currently used.

[Philippus Flavius Homovallumus]

"12-pound swords" my arse. Maces never got that heavy (the one-handed kind tend to top at around 4 kg tops), and those things work purely by mass and leverage. Big "zweihander" greatswords made to chop anything short of solid steel plate armour to bits tend to top around 3 kg despite their size...

I don't care how big and burly the Celts were, they weren't going to go around swinging six-kilo swords. No need to either. A good overhand swing from a relatively heavy (ie. 2 kg tops) longsword is going to give you about as much power as you're ever going to sensibly get out of a one-hander (Renaissance combat manuals apparently call that sort of downward cut "cut of wrath"); both Celtic and Roman mail shirts had shoulder doublings pretty much specifically to resist this sort of impact. If you want more oomph, you don't go and buy a heavier sword (unless you're switching to a straight two-hander); that'll be too heavy and cumbersome to use effectively anyway. Instead you're going to get a sword with a different point of balance - think falchion - or something like an axe or mace of similar "mass" weapon. Those aren't markedly heavier either, they just have their mass concentrated at the end of the lever which although it makes them a tad clumsy in comparision also imparts some pretty nasty leverage.

The level of metallurgy has little to do with this. The maximum viable mass of a weapon isn't determined by its materials, but by the physical limitations of its wielder - and those say that in practice one-handed swords can't go too much above one kilo in weight if you intend to fight with them for any amount of time. Metallurgy determines the resiliency, durability, edge-keeping qualities and suchlike of the weapon, and when it comes to *that* both the Celts and Romans knew how to make high-quality pattern-welded steel blades - those just tended to be pretty expensive.

We've done this. Iron is heavier than steel for a start, and both Roman and Celtic swords were iron, not steel. In fact in both cases there is evidence that the quality of weapons actually fell, rather than rose. the later "Tiberius" sword in the London Museum is of an inferior quality to the earlier Fulham sword.

Regardless I am inclined to agree that 12 pounds is very heavy. However, if Old Gamer is telling the truth then you might consider , since he has handled this weapon himself, that he could be correct.

How much do you know about Le Tene III swords, which is what this weapon probably is. I'll hold my hands up and say. "Not much."

[Watchman]

Unless the guys using those La Tene III swords were all the Incredible Hulks then I fail to see what difference it makes. They'll still have the exact same physical limitations and considerations as Charlemagne's scara cavalrymen, ranking Viking warriors, Chinese soldiers, Japanese samurai, Medieval European knights, Middle Eastern ghulams and faris or any other sword-toting combatant you care to think of to cope with. Too heavy is too heavy period. If a sword of certain size ends up too heavy using certain materials (although I'm not terribly convinced adding carbon to iron particularly lightens it in the first place, and all-iron and steel swords of the same general design AFAIK kind of tend to have similar amounts of material...) then you make a smaller sword of a sensible and manageable weight.

Now, some specialized mace designs (the Caliphate-era Arab 'amud and some Byzantine and Persian types come to mind) could be impressively heavy indeed, requiring lots of strenght and skill to use and in spite of their cumbersomeness having a habit of pulverizing just about anything they hit (there's an account of a missed 'amud swing that hit the foe's saddle cantle flatly knocking both the man and the saddle off the horse...) - but those are maces. Swords have a bit different overall operating logic, and making them very heavy was never a particularly effective move.

There's also the little detail that it's actually somewhat difficult to put all that much metal into an about meter-long blade without making it too thick to effectively cut with, and then also the heavier the sword the more difficult it is to put real speed into the swing...

This addresses more or less the same issue in detail. Personally I kind of suspect the laws of physics involved were quite the same for the ancient Celts and whoever, but maybe that's just me.

[O'ETAIPOS]

One thing you do not consider Wigferth and Old Gamer that this particular sword might have been made for god. maybe it was made to stay in shrine and look impresive. I do not know about celts, but ther are informations about such god's weapons in Slav pagan shrines.