Creating Garrison Script.

**daud.fr** · 11-03-2006, 17:38

I made some mistakes in the script posted, here is the updated one, but, unfortunately still ain't working :(.

Code:

script
declare_counter one
set_counter one 0
declare_counter Citybesieged

if I_CompareCounter Citybesieged = 0
and I_SettlementOwner Rome = [faction1]
if I_CharacterTypeNearTile [faction2] general,  2 x,y
set_counter Citybesieged 1
end_if
if I_CharacterTypeNearTile [faction2] family,  2 x,y
set_counter Citybesieged 1
end_if

if I_CompareCounter Citybesieged = 0
and I_SettlementOwner Rome = [faction2]
if I_CharacterTypeNearTile [faction1] general,  2 x,y
set_counter Citybesieged 1
end_if
if I_CharacterTypeNearTile [faction1] family,  2 x,y
set_counter Citybesieged 1
end_if

monitor_event FactionTurnStart FactionType faction1
end_monitor

if I_CompareCounter Citybesieged = 1
if  I_SettlementOwner City =  faction1
if SettlementBuildingExists = governors_villa  
if GarrisonSettlementRatio < 0.1
console_command create_unit  City "peasants" 4
console_command add_money -2000       
console_command add_population City -1500
end_if

monitor_event FactionTurnStart FactionType faction2
end_monitor

if I_CompareCounter Citybesieged = 1
if  I_SettlementOwner City =  faction2
if SettlementBuildingExists = governors_villa  
if GarrisonSettlementRatio < 0.1
console_command create_unit  City "peasants" 5
console_command add_money -2000       
console_command add_population City -1500
end_if

set_counter one 0
set_counter Citybesieged 0

terminate_script

**Atilius** · 11-03-2006, 20:29

Event monitors must start with monitor_event and must end with an end_monitor, but the stuff you wish to happen when the event triggers must be inside. Your end_monitors are now immediately after your monitor_event, so nothing will happed when the event occurs. In the lower half of the script, your ifs aren't all paired with end_ifs.

Also "peasant" is not a unit ID.

Take my advice: start very simple, make sure what you have works, then add on. Writing more than a half-dozen lines of script without errors is difficult, particularly if you haven't done a lot of scripting.

**daud.fr** · 11-07-2006, 12:05

Thanks Atilius, i'll try redo it as you adviced.

**Bardo** · 11-08-2006, 22:28

You can use my Garrison script if you want. Mine is based in the Garrison script made by LorDBulA (included into SPQR mod).
Here it is the code:

Code:

script

;console_command toggle_perfect_spy
;very useful to debug

declare_counter City1Besiged
set_counter City1Besiged 0
declare_counter City2Besiged
set_counter City2Besiged 0
;...per settlement

monitor_event FactionTurnEnd FactionType [faction1]
and I_LocalFaction [faction1]

   if I_CompareCounter City1Besiged = 0
      and not I_SettlementOwner [city1] = [faction1]
      if I_CharacterTypeNearTile [faction1] general,  2 x1,y1
         set_counter City1Besiged 1
      end_if
      if I_CharacterTypeNearTile [faction1] family,  2 x1,y1
         set_counter City1Besiged 1
      end_if
   end_if
   if I_CompareCounter City1Besiged = 2
      and not I_CharacterTypeNearTile [faction1] family, 2 x1,y1
      and not I_CharacterTypeNearTile [faction1] general, 2 x1,y1
      set_counter City1Besiged 0
   end_if

   if I_CompareCounter City2Besiged = 0
      and not I_SettlementOwner [city2] = [faction1]
      if I_CharacterTypeNearTile [faction1] general,  2 x2,y2
         set_counter City2Besiged 1
      end_if
      if I_CharacterTypeNearTile [faction1] family,  2 x2,y2
         set_counter City2Besiged 1
      end_if
   end_if
   if I_CompareCounter City2Besiged = 2
      and not I_CharacterTypeNearTile [faction1] family, 2 x2,y2
      and not I_CharacterTypeNearTile [faction1] general, 2 x2,y2
      set_counter City2Besiged 0
   end_if
   ;...per settlement

end_monitor
;...a monitor per possible local faction

monitor_event SettlementTurnEnd SettlementName [city1-mapname]
   and I_CompareCounter City1Besiged = 1
   and GarrisonSettlementRatio < 0.5
      if I_SettlementOwner [city1] = [faction1]
         console_command create_unit [city1] "unit name" 4
         console_command add_money -2000       
         console_command add_population City -1500
      end_if
      if I_SettlementOwner [city1] = [faction2]
         console_command create_unit [city1] "unit name" 4
         console_command add_money -2000       
         console_command add_population City -1500
      end_if
      set_counter City1Besiged 2
      ;...an if per faction
end_monitor

monitor_event SettlementTurnEnd SettlementName [city2-mapname]
   and I_CompareCounter City2Besiged = 1
   and GarrisonSettlementRatio < 0.5
      if I_SettlementOwner [city2] = [faction1]
         console_command create_unit [city1] "unit name" 4
         console_command add_money -2000       
         console_command add_population City -1500
      end_if
      if I_SettlementOwner [city2] = [faction2]
         console_command create_unit [city1] "unit name" 4
         console_command add_money -2000       
         console_command add_population City -1500
      end_if
      ;...an if per faction
      set_counter City2Besiged 2
end_monitor
;...a monitor per settlement


while TrueCondition
end_while

end_script

You need to change all words in brackets, I tried to use your same nomenclature. And copy-paste the code where it says ";...per faction or settlement"

Note: The condition "SettlementName" needs the name of the city that it is shown in the map, not the internal name.
You can see it in the file: data\text\imperial_campaign_regions_and_settlement_names.txt

ie:{Lepcis_Magna} Lepcis Magna
[city1]=internal name, ie:Lepcis_Magna
[city1-mapname]=name show in map, ie:Lepcis Magna

I also recommend you to read the Intermediate Guide to Scripting, By Epistolary Richard & Myrddraal. (if you didn't already read it)

Note2 - Important thing not said in this guide: When you use an "if" or "while" statment, you can only use conditions starting by "I_" . All other conditions need some Trigger requirements, and they can only be used with monitor_events. (the "Trigger requirements" of the condition must be in the "Exports" of the event)

start very simple, make sure what you have works, then add on. Writing more than a half-dozen lines of script without errors is difficult, particularly if you haven't done a lot of scripting.

Wise words. It is almost impossible to write the full script and get it working at the first attempt. I suggest you to test it with one city and 2 factions until the script is working. Then, you can add lines and adjust the script.

I hope this helps

**daud.fr** · 11-09-2006, 16:08

Bardo thanks a lot, i really appreciate your help! I'll start exprimenting right away!

**daud.fr** · 11-09-2006, 16:28

Bardo, i got confused a bit with your instructions :(.
Could you please just clarify this for me.
Am i right here:
[city name = map name = Acre, faction1 = sassanids, faction 2 = franks, unit name = crusader latin knigts (just for testing)]

Code:

script

This For each Settlement

Code:

declare_counter AcreBesiged
set_counter AcreBesiged 0

Repeat For Each Faction

Code:

monitor_event FactionTurnEnd FactionType sassanids
and I_LocalFaction sassanids

;;;;;;;Repeat For Each Settlement;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
   if I_CompareCounter AcreBesiged = 0
      and not I_SettlementOwner Acre = sassanids
      if I_CharacterTypeNearTile sassanids general,  2 151,162
         set_counter AcreBesiged 1
      end_if
      if I_CharacterTypeNearTile sassanids family,  2 151,162
         set_counter AcreBesiged 1
      end_if
   end_if
   if I_CompareCounter AcreBesiged = 2
      and not I_CharacterTypeNearTile sassanids family, 2 151,162
      and not I_CharacterTypeNearTile sassanids general, 2 151,162
      set_counter AcreBesiged 0
   end_if
;;;;;;;^^^Repeat for Each Settlement^^^;;;;;;;;;;;;;;;;;;;;

end_monitor

This Monitor For Every Settlement

Code:

monitor_event SettlementTurnEnd SettlementName Acre
   and I_CompareCounter AcreBesiged = 1
   and GarrisonSettlementRatio < 0.5
      if I_SettlementOwner Acre = sassanids
         console_command create_unit Acre "crusader latin knights" 4
         console_command add_money -2000       
         console_command add_population Acre -1500
      end_if
      if I_SettlementOwner Acre = franks
         console_command create_unit Acre "crusader latin knights" 4
         console_command add_money -2000       
         console_command add_population Acre -1500
      end_if
      if I_SettlementOwner Acre = slave
         console_command create_unit Acre "crusader latin knights" 4
         console_command add_money -2000       
         console_command add_population Acre -1500
      end_if
      set_counter AcreBesiged 2
end_monitor

Code:

while TrueCondition
end_while

end_script

Did i understand your instructions correctly?
Thanks Bardo.

**daud.fr** · 11-09-2006, 17:09

Bardo
Thanks bro, i made it work!
The problem was i forgot to add
"declare_counter loop
set_counter loop 0" in the begginning

and

"while I_CompareCounter loop = 0
end_while
end_script

in the end".

Also thanks a lot for letting me use your kind. It was very kind of you. Hopefully it is going to be included in a new patch for the Crusades!
Now i'm gonna have to copy it for all the factions))) A lot of boring work to do))