Script Error in EB 1.0 BI

[Schatten]

After Installation of EB 1.0 i have everytime i try to start the game this Script Error, with BI expansion or without, the error is the same
link:
http://www.axifile.com?9187457

thx for you help

[bovi]

The upgrade is not savegame compatible, by far.

[Augustus Ceasar]

I have a problem, I clean up well my computer (rtw, eb...) I reinstalled everything (Patchs, EB 1.0).
BUT THEY AAAARE no Roman's

What it's this bug???

[bovi]

I have no idea what you're talking about. Please try to reword your question.

Have the Bartix actually replaced the Romani in your version?

[The_Mark]

It's probably a corrupt download.

[Schatten]

The upgrade is not savegame compatible, by far.

thats no savegame, i have deinstalled eb 0.81 and fresh install eb 1.0 and after that those error was here

[bovi]

The error message references the oliphaunt ("yubtseb" cheat elephants) which are definitely not part of the initial setup, which is why I thought you were loading a savegame. You can delete their entry in EDU and see if it helps. Then using the cheat will cause a CTD however.

[Schatten]

The error message references the oliphaunt ("yubtseb" cheat elephants) which are definitely not part of the initial setup, which is why I thought you were loading a savegame. You can delete their entry in EDU and see if it helps. Then using the cheat will cause a CTD however.

strange, have never used this cheat and as said deleted eb 0.81 and install it fresh and except eb 1.0 install only ForceDiplm. Mod and EB_For_BI from here.

PS: helps not much, now the same error message for the next armoured bush elephant, i delete this whole shit, install it again and look how its work.

[mcantu]

Which method did you use to get EB working with BI?

[Schatten]

Which method did you use to get EB working with BI?

this one error is fixed, it was the "shield wall" box in the eb.bi installer :P
but now as soon i will start a campaign games crashes...so again deinstall all and install new...and if it crashes again delete all and forget this shiet^^

[Schatten]

ok now i have installed vanilla rome, patched it to 1.5, restart the comp and installed eb (atm not try to install bi).

for the second time as soon i try to start a campaigne it crashes, bevore installing eb 1.0 it has worked, file size is 668.099.207 Bytes so it should be ok.

cannot see what the problem is, use Win Vista

[Bonny]

for the second time as soon i try to start a campaigne it crashes, bevore installing eb 1.0 it has worked, file size is 668.099.207 Bytes so it should be ok.

cannot see what the problem is, use Win Vista

Do you get any erro messages?

[mcantu]

Did you install in this order?

RTW + BI + RTW 1.6 + EB 1.0 + EB for BI Installer (w/enable shield wall unchecked)

[blacksnail]

I have a problem, I clean up well my computer (rtw, eb...) I reinstalled everything (Patchs, EB 1.0).
BUT THEY AAAARE no Roman's

What it's this bug???

Are you talking about using the Custom Battles? That when you select the Romani faction you don't see most of the Romani units?

[Schatten]

Did you install in this order?

RTW + BI + RTW 1.6 + EB 1.0 + EB for BI Installer (w/enable shield wall unchecked)

for first post: the only error message is the common Win Vista Error Message: Rome Total War work no more blabla, will be closed etc. nothing special.
it happens to custom battles,historical and campaignes but if i start Vanilla RTW 1.5 if works fine, even start a Campaigne as Bruti without any problems.

for second
this time i have left bi out since have had this problem last installation with bi so this time
RTW+Patch 1.2+1.3+1.5+EB 1.0 but same problem as with bi 1.6

[The Celt]

Seems like your having the same problem as me.
I've also deleted every trace of 0.8 EB as well as my old RTW install. Reinstalled both RTW and BI, then copied that and renamed it EB, then installed EB 1.0. After that I clicked on the shortcut and waited through the first screen, then, when I got to the menu, I clicked on single player, selected "EB main Campaign" selected a faction, and got an immediate CTD.

[Schatten]

Seems like your having the same problem as me.
I've also deleted every trace of 0.8 EB as well as my old RTW install. Reinstalled both RTW and BI, then copied that and renamed it EB, then installed EB 1.0. After that I clicked on the shortcut and waited through the first screen, then, when I got to the menu, I clicked on single player, selected "EB main Campaign" selected a faction, and got an immediate CTD.

exactly the same her....vanilla rtw works fine , eb 1.0 ends in crash with and without bi....problem is clearly eb 1.0 (as ever a neverending story of crashes, ctd´s etc)

[The Celt]

Okey I think I figured it out. Turns out you need to install 1.6 patch even with BI. Just enter "RTW 1.6" in Google and find a link to the patch. Download that, install the patch, then, if you've got EB in a separate copy of your original RTW install, click on the BI .exe and RTW .exe and copy/paste them over the ones in the EB install folder.(AKA the RTW folder you copied from the original to install EB in, NOT the EB mod folder inside of that!!) Thats how I solved my issue give that a shot Schatten!

[Augustus Ceasar]

They are no romans units????

Why????

I have:
RTW 1.5
EB 1.0

[Schatten]

Okey I think I figured it out. Turns out you need to install 1.6 patch even with BI. Just enter "RTW 1.6" in Google and find a link to the patch. Download that, install the patch, then, if you've got EB in a separate copy of your original RTW install, click on the BI .exe and RTW .exe and copy/paste them over the ones in the EB install folder.(AKA the RTW folder you copied from the original to install EB in, NOT the EB mod folder inside of that!!) Thats how I solved my issue give that a shot Schatten!

i have make it so, copied clear RTW+BI 1.6 than installed EB 1.0 in the original order than used the installer for eb bi (with unchecked shieldwall box)
tested again...eb campaign, historical,custom=crash...copied the original RTW and BI.exe over the ones in eb ordner...and crash again!

since RTW and BI work still correct and without any problems and all in eb (campaign,historical,custom) ends in crash its clearly a bug in eb

i give now up after 3 days of install and deinstall i have enough of this bug-crash shiet, to bad i have deleted 0.81 it has crashed from time to time but at last it has work, eb 1.0 simply dont work whatever the reason is.

PS: in custom battles screen i see no roman army types too only regional troops...one bug more...

[JMRC]

They are no romans units????

Why????

I have:
RTW 1.5
EB 1.0

I think you're talking about custom battles not showing roman units. Look at this thread to see the answer to that.

[Bonny]

than used the installer for eb bi (with unchecked shieldwall box)
tested again...eb campaign, historical,custom=crash...copied the original RTW and BI.exe over the ones in eb ordner...and crash again!

Have you tried to play it through the RTW.exe "prior to the bi installer"? EB is designed for RTW not bi, it is possible to play it through bi, but it is a bit different to 0.8x because of some file changes from the RTW/data folder to the mod folder.

They are no romans units????

Why????

I have:
RTW 1.5
EB 1.0

EB has many different Units (more than 400), many of them are regionals, that can be recruited by more than one faction.

To solve this problem we have mad an additional edu (export_descr_units.txt, the file where all unit stats and faction ownershipd are stored) for costuma nd multiplayer games. You need to replace your normal edu (in the eb/data fodler) with the specialised costum edu (make a backup of the normal edu first!!!). If you now start the game all factions ahev only all their factional and some selected regional units availabel in costum battel and mp.

You will find the costum mp edu in the folder "your RTW directory/eb/mp custom game edu"

[Gazius]

A question to those trying to install, are you using the CD or DVD version of the game? For those who got it working and have read this topic, what did you use?

[Schatten]

Have you tried to play it through the RTW.exe "prior to the bi installer"? EB is designed for RTW not bi, it is possible to play it through bi, but it is a bit different to 0.8x because of some file changes from the RTW/data folder to the mod folder.
"

i have try to play with bi 1.6 and without, so with RTW 1.5 and EB 1.0 installation only, without BI, it was always the same thing...RTW 1.5 work, EB crash as soon you try to start any campaign.
Same thing with BI upgrade....BI 1.6 works but EB 1.0 crashes

It was everytime a fresh installation after deleting the old, helps nothing

[Bonny]

i have try to play with bi 1.6 and without, so with RTW 1.5 and EB 1.0 installation only, without BI, it was always the same thing...RTW 1.5 work, EB crash as soon you try to start any campaign.
Same thing with BI upgrade....BI 1.6 works but EB 1.0 crashes

It was everytime a fresh installation after deleting the old, helps nothing

Hast du versucht das spiel ohne Videos zu starten? Im Shortcut in der Befehlszeile -nm einfügen (hinter -show_err). KP ob das was bringt aber versuchen kostet nichts.

[Schatten]

Hast du versucht das spiel ohne Videos zu starten? Im Shortcut in der Befehlszeile -nm einfügen (hinter -show_err). KP ob das was bringt aber versuchen kostet nichts.

hab ich eben auch, ergebnis war wieder crash...keine chance sobald man versucht irgendetwas mit eb 1.0 zu starten crasht es , was ka denn es kommt nur die standartmeldung "Rome Total War funktioniert nicht mehr blabla...."
Ihr müsst irgendwo einen fehler bei programmieren gemacht haben, bei eb 0.8x gabs dieses problem nie.

[bovi]

Have you tried the validation program I posted?

[basics]

I run RTR and another 4 mods of which EB 081V2 ran fine on a B1 installation. So I downloaded the full instal of the latest mod using Filefront which seemed OK and using RAR installed the files but no installation programme marked exe. came up and no logos with which to start the game either.

My first question is does the new mod run with BI? The second, why no installation exe?

[bovi]

Basics, please make your own thread.

[Ritterlichvon86]

hab ich eben auch, ergebnis war wieder crash...keine chance sobald man versucht irgendetwas mit eb 1.0 zu starten crasht es , was ka denn es kommt nur die standartmeldung "Rome Total War funktioniert nicht mehr blabla...."
Ihr müsst irgendwo einen fehler bei programmieren gemacht haben, bei eb 0.8x gabs dieses problem nie.

Mit dieser Einstellung kommst du sicher nicht weiter.

Bei mir hat es wunderbar geklappt.

Zuerst deinstallierst du sämtliche Anwendungen bzgl. Rtw. Dann löscht du per Hand die Restdateien in den Ordnern und auch etwaige Einträge in der Registrierung von Windowf

Dann installierst du Rome Total War, aber bitte nicht die DVD Version dieser Compilation. Soweit ich das gehört hab zickt die immer rum. Dann spielst du die Patches auf, bis zu 1.5.
Danach installierst du Barbarian Invasion. Dein Spiel sollte jetzt bei 1.6 sein.

Dann installierst du Europa Barbarorum. Starte das Spiel NICHT! Du hast jetzt die Verknüpfung auf dem Desktop, Rechtsclick drauf -> Eigenschaften. Rechts neben "Ziel" muss stehen: dein Rome Ordner\RomeTW-BI.exe" -mod:eb -show_err -nm

Dann folgendes: Du gehst dahin: dein Rome Ordner\EB\Dataworld\maps\campaign
Dort Rechtsclick auf den Ordner Imperial_Campaign. Dann direkt daneben einfügen, so dass du nun 2 Ordner hast. Den zweiten (Kopie von Imperial_Campaign) nennst du um: barbarian_invasion

Dann gehst du zu EB\Data\text und findest dort imperial_campaign_regions_and_settlement_names.txt

die kopierst du ebenfalls und nennst die kopie:
barbarian_invasion_regions_and_settlement_names.txt ohne Leerzeichen bidde

Jetzt erst darfst du das Spiel zum ersten Mal starten. Hast du es vorher gemacht, fang von vorne an

Viel Glück und viel Spaß mit EB