Results 1 to 27 of 27

Thread: How do attack values work? Attack + lethality, armor/shield/etc

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Skill is omnidirectional, too, or if it isn't, it should be. Why is it only on the right? The man can only dodge on his right but not on his left? Perhaps the right side of his brain isn't properly sending nerve impulses to his left side of the body?
    EB Online Founder | Website
    Former Projects:
    - Vartan's EB Submod Compilation Pack

    - Asia ton Barbaron (Armenian linguistics)
    - EB:NOM (Armenian linguistics/history)
    - Dominion of the Sword (Armenian linguistics/history, videographer)

  2. #2
    Member Member Paltmull's Avatar
    Join Date
    Dec 2008
    Location
    Sweden
    Posts
    498

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Just a guess: Wouldn't <high attack/low lethality> be more effectictive when fighting an enemy from the front, whereas <low attack/high lethality> would be better for attacking flanks and rear? I mean, high attack won't matter that much when flanking anyway, as the enemy is unable to block. And since most attacks are likely to hit, then lethality will be what counts. This should then be the opposite when attacking from the front. High lethality won't do any good if you can't land a hit anyway.

    I hope this post is comprehensible, I'm a bit tired :P

    Spoiler Alert, click show to read: 


  3. #3
    Member Member Intranetusa's Avatar
    Join Date
    Jan 2007
    Location
    Maryland, USA
    Posts
    1,247

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Quote Originally Posted by Paltmull View Post
    Just a guess: Wouldn't <high attack/low lethality> be more effectictive when fighting an enemy from the front, whereas <low attack/high lethality> would be better for attacking flanks and rear? I mean, high attack won't matter that much when flanking anyway, as the enemy is unable to block. And since most attacks are likely to hit, then lethality will be what counts. This should then be the opposite when attacking from the front. High lethality won't do any good if you can't land a hit anyway.
    I hope this post is comprehensible, I'm a bit tired :P
    Hmmm...

    So units with high lethality (ie. those crazy 2-handed swordsmen) = bad against units with high defense skill (ie. Gaesatate)
    especially since high lethality usually goes with AP bonuses, and Gaesatate wear no armor anyways...

    High lethality + AP bonus = good against units with higher armor, but lower defense (post-Marian cohorts)
    "Science without religion is lame. Religion without science is blind...but there is one thing that science cannot accept - and that is a personal God who meddles in the affairs of his creation."
    -Albert Einstein




  4. #4
    πολέμαρχος Member Apázlinemjó's Avatar
    Join Date
    Mar 2009
    Location
    Sopianae
    Posts
    683

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Quote Originally Posted by Intranetusa View Post
    Hmmm...

    So units with high lethality (ie. those crazy 2-handed swordsmen) = bad against units with high defense skill (ie. Gaesatate)
    especially since high lethality usually goes with AP bonuses, and Gaesatate wear no armor anyways...

    High lethality + AP bonus = good against units with higher armor, but lower defense (post-Marian cohorts)
    Two handers are bad at frontal assaults, if somene wants to use their full potential, then the charge from rear is the advised.
    Spoiler Alert, click show to read: 



    Finished essays: The Italian Wars (1494-1559), The siege of Buda (1686), The history of Boius tribe in the Carpathian Basin, Hungarian regiments' participation in the Austro-Prussian-Italian War in 1866, The Mithridatic Wars, Xenophon's Anabasis, The Carthagian colonization
    Skipped essays: Serbian migration into the Kingdom of Hungary in the 18th century, The Order of Saint John in the Kingdom of Hungary

  5. #5

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    afaik armor value is multidirectional for melee and ranged, and is the "only" thing affected by AP-weapons as their name suggests. Shield is left and frontside for melee and ranged. ddefence is to be seen more of a parrade than a dodging action and thus is only for melee and the front and rightside(where the weapon is located)


    So units with high lethality (ie. those crazy 2-handed swordsmen) = bad against units with high defense skill (ie. Gaesatate)
    especially since high lethality usually goes with AP bonuses, and Gaesatate wear no armor anyways...

    High lethality + AP bonus = good against units with higher armor, but lower defense (post-Marian cohorts)
    I would agree with this especially as high armor value often goes with relatively low defence value, still high lethality is always of use :D

    Still a information on the exact math with the attack value vs total defence would be more than welcome.
    "Who fights can lose, who doesn't fight has already lost."
    - Pyrrhus of Epirus

    "Durch diese hohle Gasse muss er kommen..."
    - Leonidas of Sparta

    "People called Romanes they go the House"
    - Alaric the Visigoth

  6. #6

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Quote Originally Posted by Ca Putt View Post
    I would agree with this especially as high armor value often goes with relatively low defence value, still high lethality is always of use
    To avoid confusion among the ranks, folks this man is using defence value and defence skill value interchangeably, as defence is itself the sum of skill, armour and shield values. Don't be confused folks.
    Still a information on the exact math with the attack value vs total defence would be more than welcome.
    Any mathematicians here at the Guild? Let's make a mathematical model!
    EB Online Founder | Website
    Former Projects:
    - Vartan's EB Submod Compilation Pack

    - Asia ton Barbaron (Armenian linguistics)
    - EB:NOM (Armenian linguistics/history)
    - Dominion of the Sword (Armenian linguistics/history, videographer)

  7. #7
    Involuntary Gaesatae Member The Celtic Viking's Avatar
    Join Date
    Apr 2006
    Location
    In the heart of Hyperborea
    Posts
    2,962

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Armour counts in all directions, but against armour piercing weapons only half of it is counted.
    Defensive skill counts to the front and right, but not at all against missiles from any direction.
    The shield value counts from the front and left, and is counted double vs missiles from the front.

    As for attack vs lethality, I think Paltmull is correct. For the same reason, against units with low defense value, a high lethality is worth more than a high attack, while more defensive units are better met with a higher attack (though AP is even better, of course). Then attack speed can come into play, but I think only the cavalry lances have that to such a degree as to be worth noting.

    But that's only speaking of green units. If we take experience into account, then a high lethality becomes ever more valuable, as the attack value increases but lethality does not. You're stuck with whatever lethality you start with, while the attack value is steadily devalued. With the examples you give, the potentials are 18/.225 and 26/.11; the former is clearly the better, because it easily has enough attack to land hits on a regular basis, while it has more than twice the lethality than the latter.

    There is a guide to the EDU in the Scriptorium. Here's the link.

    Edit:

    Quote Originally Posted by Intranetusa View Post
    Hmmm...

    So units with high lethality (ie. those crazy 2-handed swordsmen) = bad against units with high defense skill (ie. Gaesatate)
    especially since high lethality usually goes with AP bonuses, and Gaesatate wear no armor anyways...

    High lethality + AP bonus = good against units with higher armor, but lower defense (post-Marian cohorts)
    I don't think Paltmull was talking about defence skill at all, but rather the full defence value of armour, skill and shield added up together. The reasoning being that, since only the armour counts from the back, a unit attacking from the back need less in attack to land hits, and would thus profit more from being able to kill more often when landing hits: ie, higher lethality.

    On the other hand, when attacking from the front you need to pass armour, shield and skill, so from there a higher attack becomes more important.

    In other words, units with high lethality weapons are absolutely fabulous against Gaesatae when sticking their pointy things in from behind.
    Last edited by The Celtic Viking; 06-23-2010 at 00:20.

  8. #8
    Member Member Intranetusa's Avatar
    Join Date
    Jan 2007
    Location
    Maryland, USA
    Posts
    1,247

    Default Re: What were the main factors which contributed to Alexander conquering the Persian

    Now one of the main questions is - is the armor, sheild, and defense equal?
    ie. if engaging in front melee, what is better: having +1 shield or +1 armor or +1 defense?

    From playing with TW Fanatic's hoplite tweak, it seems that giving hoplites short_pike as well as 6 points in shield makes them nigh invincible from the front against most units, even if it is a milita hoplite... So I'm assuming shield value is worth the most, then armor, and then defense skill?

    And would defense skill count towards left side, front, and right side if the unit doesn't have a shield?

    The guide says front and right only, so that would mean a unit with no shield and no armor would have a total of 0 defense value on its left side... O_o

    btw, going off topic, can someone give me an example of the console code to spawn units?

    I've been trying for a while without success. Maybe I should use the unit names in unit_dictionary_tag instead of descr_unit?
    Last edited by Ludens; 06-28-2010 at 19:16. Reason: merged posts
    "Science without religion is lame. Religion without science is blind...but there is one thing that science cannot accept - and that is a personal God who meddles in the affairs of his creation."
    -Albert Einstein




  9. #9
    Involuntary Gaesatae Member The Celtic Viking's Avatar
    Join Date
    Apr 2006
    Location
    In the heart of Hyperborea
    Posts
    2,962

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Defense skill never work for any other direction than front and right. If a unit doesn't have a shield value, then it simply doesn't get any shield bonus.

    As for unit creation, you can find the unit name in the EDU. It should be the first name given. For example, for 1 basic Pahlavan horse archer with 2 experience, 3 armour upgrade and 4 weapon upgrade in Persepolis it is:

    create_unit Persepolis "steppe missile cavalry pahlava shivatir" 1 2 3 4

  10. #10
    Member Member Intranetusa's Avatar
    Join Date
    Jan 2007
    Location
    Maryland, USA
    Posts
    1,247

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Quote Originally Posted by The Celtic Viking View Post
    Defense skill never work for any other direction than front and right. If a unit doesn't have a shield value, then it simply doesn't get any shield bonus.
    Interesting. I guess that means attacking a Gaesatate is better from the left than the right side due to the 4 shield vs 15 defense skill ratio...

    Quote Originally Posted by The Celtic Viking View Post
    As for unit creation, you can find the unit name in the EDU. It should be the first name given. For example, for 1 basic Pahlavan horse archer with 2 experience, 3 armour upgrade and 4 weapon upgrade in Persepolis it is:
    create_unit Persepolis "steppe missile cavalry pahlava shivatir" 1 2 3 4
    Cool thanks! Time to spawn 10 full stacks of gold chevroned Iberian Assault Infantry & Sacred Band to attack Rome... :D

    EDIT: Btw,

    "steppe missile cavalry pahlava shivatir" isn't an actual unit right? I can't find it in the EB units list on: http://europabarbarorum.heimstatt.net/
    Last edited by Intranetusa; 06-23-2010 at 00:45.
    "Science without religion is lame. Religion without science is blind...but there is one thing that science cannot accept - and that is a personal God who meddles in the affairs of his creation."
    -Albert Einstein




  11. #11
    Involuntary Gaesatae Member The Celtic Viking's Avatar
    Join Date
    Apr 2006
    Location
    In the heart of Hyperborea
    Posts
    2,962

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Quote Originally Posted by Intranetusa View Post
    Interesting. I guess that means attacking a Gaesatate is better from the left than the right side due to the 4 shield vs 15 defense skill ratio...
    That's correct.

    Quote Originally Posted by Intranetusa View Post
    Cool thanks! Time to spawn 10 full stacks of gold chevroned Iberian Assault Infantry & Sacred Band to attack Rome... :D
    Glad I could help you with that noble endeavour.

    Quote Originally Posted by Intranetusa View Post
    EDIT: Btw,

    "steppe missile cavalry pahlava shivatir" isn't an actual unit right? I can't find it in the EB units list on: http://europabarbarorum.heimstatt.net/
    Yeah, it is. It's the Shivatir-i Pahlavanig (Parthian Horse-Archers)


  12. #12
    EB:NOM Triumvir Member gamegeek2's Avatar
    Join Date
    Mar 2007
    Location
    Hanover, NH
    Posts
    3,569

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    According to Aradan, the formula for chance to kill is (assuming Medium difficulty)

    const1 * lethality * 1.1 ^ ( ATK - DEF + MDF )

    not sure what const1 is, but it is a constant, so when comparing values you don't need to factor that in
    Europa Barbarorum: Novus Ordo Mundi - Mod Leader Europa Barbarorum - Team Member

    Quote Originally Posted by skullheadhq
    Run Hax! For slave master gamegeek has arrived
    "To robbery, slaughter, plunder, they give the lying name of empire; they make a desert and call it peace." -Calgacus

  13. #13
    Sandwich Maker Member Kikaz's Avatar
    Join Date
    Mar 2009
    Location
    The land of many lakes
    Posts
    155

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Quote Originally Posted by Intranetusa View Post
    Gaesatate
    Okay this is off topic but it's been bugging me and I have to ask: Why don't you type Gaesatae? At first I thought it was a spelling error but you've been quite consistent with the spelling and I'm curious as to why you spell it like that.


  14. #14
    Member Member Intranetusa's Avatar
    Join Date
    Jan 2007
    Location
    Maryland, USA
    Posts
    1,247

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Quote Originally Posted by Kikaz View Post
    Okay this is off topic but it's been bugging me and I have to ask: Why don't you type Gaesatae? At first I thought it was a spelling error but you've been quite consistent with the spelling and I'm curious as to why you spell it like that.
    Because it's an incredibly difficult word to spell, and I always thought it was pronounced with two t's such as: Gus-ta-tay?
    "Science without religion is lame. Religion without science is blind...but there is one thing that science cannot accept - and that is a personal God who meddles in the affairs of his creation."
    -Albert Einstein




  15. #15
    Member Member Macilrille's Avatar
    Join Date
    Sep 2006
    Location
    Aarhus, Denmark
    Posts
    1,592

    Default Re: How do attack values work? Attack + lethality, armor/shield/etc

    Quote Originally Posted by Intranetusa View Post
    btw, going off topic, can someone give me an example of the console code to spawn units?

    I've been trying for a while without success. Maybe I should use the unit names in unit_dictionary_tag instead of descr_unit?
    Write exactly as follows:
    create_unit settlement/"Character" "Type" _ _ _ _

    -Character is in " " and is the character name, example create_unit "Lvcvis Romanvs"

    -Type is the name you find in descr_unit, for example "roman infantry polybian triarii" some of the eastern and Cartie names are... not easy.

    - _ _ _ _ is Number(1-20) Experience(1-9) Armour(1-3) Weapon(1-3), note that you can give units Gold and Silver shields and weapons still using the console despite EB not allowing anything over Bronze or 1.

    If there are several characters of the same name (Lvcivs Romanvs, LvcivsA Romanvs - LvcivsB -> LvcivsL Romanvs I think L is highest), you type character_reset through the names until you see the one you wish to give units having his movement reset if it is your own or until the game lets you if it is another faction or Eleutheroi (IE the character exists).

    Notice that if you give a faction units you also need to give it money as the upkeep will ruin it otherwise and effectively stop them doing anything. If you add units and money the AI will use it, if only units it stops in its tracks and just stand around.

    I have often tried to use this, move_character(moving rebel stacks to nearest rebel settlement) and add_money to stop blitzing from AI factions and get a historical-ish expansion, but it never succeeds, even with 60+ units and a million Mnai The Yellow Death and Pontos in my current campaign is still overrunning the AS and the Sweboz still pwns their Eleutheroi neighbours. I am not certain it is worth the hassle. I have also used it to get reformed Sweboz infantry after reforms should have happened but only heavy cav was available. I created infantry in the relevant towns and gifted other factions with the equivalant Mnai.
    'For months Augustus let hair and beard grow and occasionally banged his head against the walls whilst shouting; "Quinctillius Varus, give me my legions back"' -Sueton, Augustus.

    "Deliver us oh God, from the fury of the Norsemen", French prayer, 9th century.
    Ask gi'r klask! ask-vikingekampgruppe.dk

    Balloon count: 13

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO